SMS-1000 pages

SMS-100
SMS GSM Messaging
Specifications
Power Input

1. DC Input 7-70V / 2A
2. AC to DC Power supply 12V / 2A

Power Consumption

2A (during TX burst mode)

Operation Temperature

-20 - +70 °C

Relative Humidity

Max. 95%

Dimensions

123.0 (L) x 95.0 (W) x 35.0 (H) mm

Weight

155 g +/- 2%

Features
Quad band system: GSM 850, EGSM 900, DCS 1800, PCS1900
Transmission: Class 4(2W) at GSM 850 and EGSM 900, Class 1(1W) at DCS 1800 and PCS 1900
Obtain controller warning via SMS message
Activate GPRS or configure specific parameter setting
GPRS fails connection failure or terminate connection, system automatically change into auto-answer SMS mode
When a controller generated alarm message is not resolved, three-alarm trigger time interval can be set from 00:00 to 59:59 (min: sec)
with maximum of 3 alarm repeats
Maximum of up to 5 sets of notifying telephone numbers
Record up to 32 sets of controller alarm messages (Including SMS command text message)
Password locked SMS command text message
Genset controllers and ATS controllers require KUTAI RS-485 communication module for connection to SMS-100
USB port for connecting to PC to monitor and configure settings via proprietary software (SMS100 Setup)
To monitor, as well as allow remote control and configuration of the KUTAI genset controller or ATS controllers

Antenna Mechanical Specifications

Mechanical Specifications

290.0 ± 3
260.0 ± 2
24.2

95.0
85.0

1.0

4.5

DATA

123.0
112.0
95.0

GPRS

35.0

RG-174

RS485
DC12V/2A

30.0

10000.0 ± 60

Frequency

20 W

Weight

4.5x9.5

2 dbi

Max. Power

OB

50 ohms

Gain

USB

824-960M Hz / 1710-2170M Hz

Resistance

DC7~70V

125 g +/- 2%

TEL : +886-7-8121771
FAX : +886-7-8121775
Headquarters : No.3, Lane 201, Chien Fu St., Chyan Jenn Dist., Kaohsiung 80664, TAIWAN
Please link to http://www.kutai.com.tw for detailed manual.