OPM3000 pages

OPM300

Optoelectronics & Engineering Services

Optical Power Monitor with Front Panel Control
HIGHLIGHTS

APPLICATIONS

• Maximum optical
power

0 dBm (1 mW)
+ 15 dBm (30mW)

• Production automation
(e.g.: connectorization, pigtailing)

• Noise equivalent
power (NEPRMS)

-75 dBm (30 pW)

• Component testing

• Rise / Fall time
(10% - 90%)

25 µs

• Output

linear analogue

• Quality control
• OEM

• Manual control via front panel switches.

MEASUREMENT PRINCIPLE
The OPM300 series of optical power
monitors employs photodiodes to measure
optical
power.
Precision
dual
transimpedance input stages provide for
high common mode rejection and linearity
throughout the full dynamic range of the
system.

OPM300englRevB.doc

FIELDS OF APPLICATION
These optical power monitors are
particularly useful for the measurement
and monitoring of optical power in the
standard telecommunications bands. The
output is a voltage linearly proportional to
power. The fast response time at high
signal-noise-ratio makes the OPM300
series particularly useful in systems
control feedback loops, such as in fibre
alignment systems. The high sensitivity
and
wide
dynamic
range
allow
measurement of fibre coupled lasers and
LEDs alike.
Artifex Engineering
Dortmunder Str. 16-18
26723 Emden, Germany

Several options of photodiode material
and optical input, including free beam
input, make these units useful in a wide
range of applications including nontelecom metrology.
The OPM300 series is insensitive to
electromagnetic interference by design, an
important factor when working in „dirty“
industrial environments. Case wings
provide for mounting on standard 25mm
and 1“ optical table tops and for OEM
applications. 19“ rack mounting is also
available.

Tel: +49-(0)4921-58908-0
Fax: +49-(0)4921-58908-29

TZA

Σ

Output

TZA

mail: info@afx-eng.com
http://www.afx-eng.com