عضویت 
ورود اعضا
راهنمای خرید
MAGNUM 400 ®0 pages
MAGNUM 400 ®
Stand alone full digital servodrive 380÷480 VAC power
supply range. Direct off-line. Driving motor ranges up to
32 Nm encoder or resolver feedback.
STANDARD FEATURES
380÷480 VAC power supply with EMC line filter and in-rush circuit on- board
Regen circuit with internal power resistor
Speeder-One® software interface (Windows 98/2000/XP based)
Parameter setting by four keys on the front panel or RS232 (optoisolated)
Optical isolation between power stage and signals
Feedback modes: - resolver (2-4-6-8 poles) sw encoder emulation
- encoder (max 250 KHz) sw divideble encoder emulation
OPTIONS
CBMD CAN BUS - CAN V2.0B (°▵) + RS232 to CAN BUS multidrop
CAN OPEN protocol implementations: DS301-V4.02 - DSP402-V2.0
RS 485 interface, Mod Bus-RTU based (°▵), 230 kbps max
ER Encoder and Resolver feedbacks (both)
Boostered dumping resistors (external)
SEF Safety Enable Function (according to EN954-1/cat.3)
RXDB Black-out dynamic brake function (with internal power resistor)
HBD Internal Holding Brake Drive Circuitry
SPECIFICATIONS
Nominal switching frequency:
8 KHz
Output frequency:
0 ÷ 500 Hz
Current loop bandwidth:
2 KHz
Velocity loop bandwidth:
200 Hz
Operating mode
- Velocity reference (differential):
±10 VDC (15 bit resolution)
- Pulse /direction (for stepper motor control)
- Torque control
- Position control
- Encoder following
9 opto-isolated digital inputs:
24 VDC - 7mA (PLC compatible)
2 opto-isolated digital outputs:
24 VDC - 50mA max (PLC compatible)
2 analog outputs (programmable)
Motor current monitor:
±10VDC (at peak current)
Motor speed monitor
±10VDC (at max speed)
Relé ok output contacts:
30 VAC/DC - 500 mA max
Ambient temperature
- operating at rated data:
0 ÷ 45°C (no derating)
- rated and peak current derating:
45 ÷ 55°C (2.5% / °C)
- maximum operating:
55°C max
- storage:
–20 ÷ 55°C
Humidity (w/out condensation):
85% max (operating & storage)
Altitude A.M.S.L.
- operating at rated data:
1000 m
- rated and peak current derating:
1000 ÷ 2500 m (1.5 %/100m)
Enclosure protection:
IP20
Storage duration:
1 year max*
MODEL
SIZE
Rated Current (Arms)
Peak Current (Arms) x 5 sec.
F1: Supply Line Fuses (T-type = time-lag)
Power Supply (3PH) (grounded systems only)
Logic Supply (from insulating transformer)
COMPLIANT
Typical Applications are:
Conveyors, Medical, Textile Equipment,
Packaging Machinery, Positioners,
Converting Machinery, Feeders.
ACCESSORIES
(see specific data sheets for details)
SERVOMOTORS:
- SUPER SAX: 0.35÷30 Nm
MOTOR CABLES:
- CBLS: pre-assembled shielded power
and feedback cables
MOTOR CHOKE:
- LXT: for power cable longer than 25 m
EXTERNAL REGEN RESISTORS
NOTE:
*: After 1 year storage duration the internal
electrolitic power capacitors must be re-formed.
Contact Axor’s technical department for details.
MAGNUM 400
1.5 / 3
3.5 / 7
7 / 14
10 / 20
14 / 28
20 / 40
1.5
3.5
7
10
14
20
3
7
14
20
28
40
4A / 500V 6A / 500V 8A / 500V 10A / 500V 16A / 500V 20A / 500V
3 x 380 VAC (-10%) ÷ 480 VAC (+10%) 50/60 Hz (single-ph 230 VAC permitted for setup only)
24 VDC (-0% +15%) - 1 ADC (3 Adc with brake)
# AXOR IND. A COMPLETE LINE OF MOTORS AND SERVODRIVES #
IND A COMPLETE LINE OF MOTORS AND SERVODRIVES
