pH(ORP) Sensor0 pages
Specifications Sheet
No.SPEC-3109E
(1st Edition)
SP
pH (ORP) SENSOR ASSEMBLY
SPECIFICATIONS
Flow-Through Type Probe
Electrode holder for pipe line or sampling method
Model
Operation temperature range
Operation pressure range
Operation flow range
SP3101
Rc1(PT1 female screw) or
JIS 10K-25A flange
Polypropylene
Polypropylene, fluorine rubber,
hasteloy C, fluorocarbon resin, IIR
G1/2(PF1/2 female screw )
(2 positions)
-5 ~ 50 °C
2
0 ~ 200kPa {0 ~ 2kgf/cm }
20l/min or less
Conductivity in measured liquid
Weight
10mS/m {100 µS/cm} or greater
Approx. 3kg
Process connection
Body
Liquid contact
materials
Others
Cable conduit
SP3101
IIR: Isobutylene-isoprene rubber
Immersion Type Probe
Used, immersing into a reaction reservoir or tank directly, or sampling reservoir
Model
Mounting
Body
Liquid contact
materials
Others
Cable conduit
Immersion length
Operation temperature range
Operation pressure
Operation flow range
Conductivity in measured
liquid
Weight
SP3301
JIS 10K-100A flange
Polypropylene
Polypropylene, fluorine rubber,
hasteloy C, fluorocarbon resin,
ceramic, glass, IIR
PF1/2 female screw (2 positions)
0.5, 1.0, 1.5, 2.0m
-5 ~ 50 °C
Atmosphere
2m/sec or less
10mS/m {100 µS/cm} or greater
Approx. 3kg
SP3311
Metal fittings
Polypropylene
TPX resin, glass, ceramic
---0.5, 1.0, 1.5m
-5 ~ 50 °C
Atmosphere
2m/sec or less
10mS/m {100 µS/cm} or
greater
Approx. 1kg
SP3301
SP3311
Submersion Type Probe
Used, submersing in water of an underground reservoir
which is impossible in maintenance.
Model
Liquid contact materials
Cable
Operation temperature
range
Operation pressure range
Operation flow speed
range
Conductivity in measured
liquid
Weight
SP3201
TPX resin, glass, ceramic, IIR,
Polyethylene
6m long, outer diameter φ 6mm
-5 ~ 50 °C
3mH2O or less
2m/sec or less
10mS/m {100 µS/cm} or greater
Approx. 0.8kg
SP3201
"