B50 gas bottle heater0 pages

B50 GAS BOTTLE HEATER
Description
B50 gas bottle wrap on heater is a flexible and watertight heating panel coated with 2 plastic fabrics : an
heating red face and an insulated blue face.
This gas bottle heater is able to warm up and maintain gas bottle up to 45° max temperature, by
C
compensating the bottle cooling down due to gas expansion, and thus to avoid the pressure fall which
prevents gas from flowing out the bottle.
Heater has 2 heating sections which are regulated separately : 1 upper section and 1 lower section ; as a
result, these 2 different sections allow to compensate heat losses of the bottle according to its filling level :
this is a safe and ready to use device.
It is built with stainless eyelets and elastic quick fastening on top, and its side fastening with gripping belts
allows to keep the flexible heater wrapped closely around the bottle, and so to get a perfect heat exchange
between heating panel and gas bottle.
Advantages
B50 gas bottle wrap on heater covers the full cylinder of the bottle, making homogeneous and soft warming
up and avoiding over-heating.
Thanks to the insulated face, heat losses are greatly lowered.
Technical data
0.8m
mm
Outside dimensions
Degree of protection
400 W
230 V
3m
Heigth = 1.45 m
Width = 0.80 m
IP54
Upper
section
1.45 m
Output
Voltage
Main supply cord length
Lower
section
DOC0502A
BP 14 – P.A de la Vallée Yart – F -78640 ST-GERMAIN-DE-LA-GRANGE (France) – Tél. 33 1 34 91 04 04 – Fax 33 1 34 89 38 18 – info@aaatelec.com
SAS au capital de 252 360 € - Siret 328 478 631 00034 – APE 297 A – N°TVA : FR04328478631