Condensate drain band CB0 pages

DRAIN BANDS – CB RANGE
FOR CONDENSATE OUTFLOWING
Applications :
- Heating of drain pipe
- Heating of drip pan
-Temperature maintenance for process heating.
Reversing cycle use only.
Mounting and connection must be carried out according to these instructions.
Use for applications other than listed above is not allowed.
Safety regulations:
For mounting and start up all regulations for safety and accident prevention as well as
directions and standards of the individual country have to be observed.
The heating cable may only be mounted by authorized personell!
The electrical connection may only be made by an electrical technician according to the
electrotechnical regulations.
Modifications on the heating cable are not allowed.
Installation
The heating cable or cold lead must not be shortened.
Do not fix the heating cable, e.g. with clamps.
The heating cable must not touch any sharp edged parts.
The heating cable must not cross or touch itself at any place.
Min. bending radius 25 mm
The heating cable must be mounted in a way that avoids accumulation of heat.
The heating cable must not be put across or through combustible material.
Electrical security and and safety measures are to be provided on site.
Perform insulation test before start-up.
If used in metal pipes, they have to be included in the electrical safety measures (pipes to be
earthed).
Subject to technical changes.
DOC0540A
BP 14 – P.A de la Vallée Yart – F -78640 ST-GERMAIN-DE-LA-GRANGE (France) – Tél. 33 1 34 91 04 04 – Fax 33 1 34 89 38 18 –
info@aaatelec.com
SAS au capital de 252 360 € - Siret 328 478 631 00034 – APE 297 A – N°TVA : FR04328478631
Page 1