D5F0 pages

High-precision Optical Switch

D5F

CSM_D5F_DS_E_2_2

Optical System Achieves 1-μm Operating Position
Repeatability in this 4-way Switch
• No-contact structure for high reliability.
• Ceramic materials in measuring part for superior resistance
to abrasion.
• Two different output types (PNP and NPN) available.
• Less abrasion and damage of mechanical contacts compared
to switches with contacts, reducing fluctuation in the output.
• More compact than previous OMRON models: 40% less mass,
15% lighter across the operating width.
Be sure to read Safety Precautions on page 4 and Safety Precautions for All
Limit Switches.

Ordering Information
Output configuration

Contact form

Operation indicator

PNP open collector
(+ common)

SPST-NC

ON when not operated

NPN open collector
(− common)

SPST-NO

Cable length

Model

1m

D5F-2B10

3m

D5F-3C10

3m

ON when operated

D5F-2B30

1m

D5F-3C30

Specifications
Ratings

Characteristics

Power supply
voltage

12 to 24 VDC±10%, ripple (p-p): 10% max.

Degree of protection

Output current

100 mA max.

Durability *1

Power
consumption

30 mA max.

Operating speed

1 μm/s to 0.5 m/s

Leakage current

0.15 mA max.

Max. operating frequency

60 operations/minute max.

Residual voltage

2 V max.

Insulation resistance

100 MΩ min. (at 500 VDC) between each
terminal and non-current-carrying metal part

Dielectric strength
(50/60Hz 1min)

1,100 VAC between each terminal and
non-current-carrying metal part

Vibration
resistance

Malfunction

10 to 500 Hz, 1.3-mm double amplitude

Shock
resistance

Malfunction

300 m/s2 max.

Mechanical
Electrical

Repeat accuracy

IP67
5,000,000 operations min.

1 μm max. *2

Ambient temperature *3 Operating: −10°C to +60°C (with no icing)
Ambient humidity

Operating: 35% to 95%RH

Weight

Switch body: Approx. 50 g; Cord: Approx. 23 g/m

Note: The above figures are initial values.
*1. Durability values are calculated at an operating temperature of +5°C to
+35°C, and an operating humidity of 30% to 70%RH. Contact your OMRON
sales representative for more detailed information on other operating
environments.
*2. Measurements were conducted repeatedly at the same point. The value is
1 μm max. for 200 measurements. For other conditions in detail, contact
your OMRON sales representative.
*3. The ambient operating temperature varies depending on the current. Refer
to the following Engineering Data.
Deviation in electrical durability
after 1,000,000 operations

10 μm max.

Temperature coefficient *

±50 × 10×6/°C max.

* Operating position fluctuation rate for a change of 1°C in the ambient
temperature.

1