MIC2589/MIC2595 Single-Channel, Negative High-Voltage Hot Swap Power Controllers/Sequencers0 pages

MIC2589/MIC2595
Single-Channel, Negative High-Voltage Hot
Swap Power Controller/Sequencer
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com
December 2005
M9999-120505
(408) 955-1690
General Description
The MIC2589 and MIC2595 are single-channel, negative voltage hot swap controllers designed to address the need for safe insertion and removal of circuit boards into “live” system backplanes, while using few external components. The MIC2589/MIC2589R and the MIC2595/MIC2595R are each available in 14-pin SOIC packaging and work in conjunction with an external N-Channel MOSFET for which the gate drive is controlled to provide inrush current limiting and output voltage slew-rate control. Overcurrent fault protection is also provided via a programmable overcurrent threshold and filter. Very fast fault response is provided to ensure that system power supplies maintain regulation even during output short circuits. These controllers offer two responses to a circuit breaker fault condition: the MIC2589 and MIC2595 latch the circuit breaker’s output off when the overcurrent threshold interval is exceeded and the overcurrent filter times out while the MIC2589R and MIC2595R automatically attempt to restart at a fixed duty cycle after a current limit fault. A primary Power-Good signal and two secondary (delayed and staggered) Power-Good signals are provided to indicate that the output voltage is within its valid operating range. These signals can be used to perform an all-at-once or a sequenced enabling of one or more DC-DC power modules.
All support documentation can be found on Micrel’s web
site at www.micrel.com.
Features
• Provides safe insertion and removal from live –48V (nominal) backplanes
• Operates from –19V to –80V
• Fast responding circuit breaker (<1ìs) to short circuit conditions
• User-programmable overcurrent detector response time
• Electronic circuit breaker function:
Output latch OFF (MIC2589/MIC2595)
Output auto-retry (MIC2589R/MIC2595R)
• Active current regulation to control inrush currents
• Programmable undervoltage and overvoltage lockouts (MIC2589/MIC2589R)
• Programmable UVLO hysteresis (MIC2595/MIC2595R)
• Staggered ‘Power-Good’ output signals provide load sequencing
Active-HIGH (-1)
Active-LOW (-2)
Applications
• Central office switching
• –48V power distribution
• Distributed power systems
• AdvancedTCA
_________________________________________________________________________________________________________
Ordering Information
Part Number
Standard
Pb-Free
PWRGD Polarity
Lockout Functions
Circuit Breaker Function
Package
MIC2589-1BM
MIC2589-1YM
Active-High
Programmable UVLO & OVLO
Latched Off
14-Pin SOIC
MIC2589-2BM
MIC2589-2YM
Active-Low
Programmable UVLO & OVLO
Latched Off
14-Pin SOIC
MIC2589R-1BM
MIC2589R-1YM
Active-High
Programmable UVLO & OVLO
Auto Retry
14-Pin SOIC
MIC2589R-2BM
MIC2589R-2YM
Active-Low
Programmable UVLO & OVLO
Auto Retry
14-Pin SOIC
MIC2595-1BM
MIC2595-1YM
Active-High
Programmable UVLO Hysteresis
Latched Off
14-Pin SOIC
MIC2595-2BM
MIC2595-2YM
Active-Low
Programmable UVLO Hysteresis
Latched Off
14-Pin SOIC
MIC2595R-1BM
MIC2595R-1YM
Active-High
Programmable UVLO Hysteresis
Auto Retry
14-Pin SOIC
MIC2595R-2BM
MIC2595R-2YM
Active-Low
Programmable UVLO Hysteresis
Auto Retry
14-Pin SOIC