عضویت 
ورود اعضا
راهنمای خرید
Arcspray 170AC-CL0 pages
Metallisation Arcspray 170AC-CL
Thermal spray equipment and consumables
AIR-COOLED SUPPLIES
The ARC170AC system has been developed with air-cooled cables for a lighter hand-held pistol weight when spraying at 700A. The use
of air cooled cables, as well as some other pistol modifications has reduced the hand held weight by about 2kg - a significant benefit to
the spray operators. The patented Synchro-drive system, giving push/pull wire feed, also assists in minimising the weight of the pistol in
the hand. The pusher and pistol are driven by one new, powerful brushless AC drive motor for greater reliable operation. The
ARC170AC-CL system can spray large diameter wires (1/8" and 3/16") and is the recommended system for large scale, anti-corrosion
structures which are relatively simple shapes. The push/pull drive system allows unrivalled wire feed distance of 10m. The system can be
further extended by 10m or 15m from the energiser for large site applications. The pistol and drive unit are combined with a 700amp
energiser, operating at 100% duty cycle in the harshest environments. The control electronics are housed in a sealed enclosure for further
reliable operation. An industrial PLC offers closed-loop control of the current for simple setup and reliability. All these factors
combined result in unrivalled spray rates, superior reliablility, operator comfort and excellent efficiency.
10m wire drive = great spraying
10/15m supplies extension options
700A, 100% duty cycle = reliable
Closed loop current = simplicity / reliability
3.17/4.76mm wires = high throughput
Air-cooled cables = lightweight / flexible
Flexible pistol movement
Easy to maintain = lower downtime
MIG, hardboard reel or Drum dispense
Zinc, Alumininium or Zinc/Aluminium alloy
Material | Wire Diameter | Throughput (kg/hr @ 700A) | Coverage m2/kg/1 OOu |
Metallisation Wire 01E Aluminium | 3.17mm (1/8") | 21 | 3.18 |
4.76mm (3/16") | 24 | 3.13 | |
Metallisation Wire 02E Zinc | 3.17mm (1/8") | 72 | 0.96 |
4.76mm (3/16") | 92 | 0.94 | |
Metallisation Wire 21E Zinc/Aluminium 85/15 | 3.17mm (1/8") | 70 | 1.07 |
4.76mm (3/16") | 75 | 1.07 |
All figures are approximate and will vary dependent on spraying parameters and technique.
Typical Applications:
Structural steelwork
Offshore/oil & gas
Shipbuilding/marine
Bridges (concrete & steel)
Vessels & enclosures
Wind turbine towers
Large anti-corrosion
www.metallisation.com
+44(0)1384 252 464
"
