CP25x/X0 pages

KeControl C2
CP 25x/X CPU-Module
l
l
l
l
Flexibility through modular CPU concept
Cost reduction through operation-optimized
CPU type.
Time savings during installation, start-up
operation and service. For direct clip-on to
mounting rail.
Availability and reliability through use of tried
and tested components from the PC world.
Brief description
The modules of the CP 25x-series are central processor modules from the K2-200 module system.
They include a processor with a computing power bandwidth from a Celeron ULV400 to a
Pentium M 1.4 GHz and an internal memory of 256MB to 512 MB RAM.
VXWorks and Windows XP embedded are available as operating systems.
Onboard the CP is equipped with interfaces for communication via CAN, RS232, 2xUSB and Ethernet.
The firmware- and application data are stored on a Compact Flash memory card. Slot-in option
modules can be used to extend the functionality for further communication interfaces such as
RS485/422, RS 232, Current Loop, Ethernet, K-Net and an additional CAN-circuit. The connection of
graphic panels from the extensive range of Kemro panels is realized via a DVI graphic interface. The
states during start-up and operation are displayed via a 7-segment display and a power LED. The
corresponding operating states are accessed via a switch.
The laterally installed K-Bus allows up to 12 I/O field buses and technology modules to be added on to
the CP 25x module. Further to this, CAN or K-Net bus link modules can be used to decentralize
module clusters with I/O modules from the K2-200 module system and transmit over distances
according to CANopen- or K-Net specification.
Version 1.0, material no. 1000572
© KEBA 2006
1