Continuon? 8U/ES0 pages
THE
PRODUCT LINE
www.ibus.com
Continuon™ 8U/ES
8U 14-slot CompactPCI® Sparc Netra™ Blade Platform
Ordering Information
Continuon™ 8U/ES
Standard Configuration includes :
• C0814D 8U System Platform
• CP20xx or CP1500 SBC & Rear I/O
• Sparc Processor
• 256MB ECC SDRAM
• Additional CPxxxx Computing Blades
---------------------------------------------Power Subsystem Options
PSU-AC
Four 200W N+1 AC power supplies
PSU-DC
Four 200W N+1 -48VDC power supplies
PIM-AC
Redundant AC isolated input modules
PIM-DC
Redundant DC isolated input modules
PIM-UPS
AC input module and an embedded UPS kit
SDM-64MB
SDM-128MB
SDM-256MB
SDM-512MB
SDM-768MB
Memory Options
64MB RAM
128MB RAM
256MB RAM
512MB RAM
768MB RAM
Control & Monitoring Options
IBC-2501
Chassis Management Controller, IPMI v.1.0
compliant Module.
Operating System Options
• Sun Solaris™
Misc
• Dual 400W AC or DC Power Supplies
• UK, European or IEC Power Cords
Specifications
Chassis
• 8U Height
• 14" x 17.1" x 12" (hwd) 356 x 434 x 304 mm
Sun NetraTM CP 2060 SBC
• 500MHz Ultra SPARCTM IIe 64-bit processor
• Solaris 8 CD 6 Operating System
• Integrated 4-way 256KB L2 cache
• 512MB soldered on board ECC RAM
• 1MB on-board boot flash, 4MB user
programmable flash memory
• Sun Microcontroller, IPMI interface
• One PMC 32 bit 33MHz available
• Two RS-232C asynchronous serial ports
• Two USB ports
• Two 10/100 Mb/sec. Ethernet Interfaces
• Ultra-2 SCSI PMC with Rear I/O
• 1-Slot (4HP) x 6U CompactPCI Compliant
• CompactPCI Compliant Rear I/O Board
Supported SBCs
CP2040, CP2060, CP2080, CP1500
Backplane
• Integrated 14-slot backplane
• Supports one-slot system master (slot#1)
• 13 full hot-swap I/O slots
• 13-slot continuous H.110 backplane
• Rear low-profile pallet bridge between slots 7&8
• Dual power input connectors
Drive Expansion
• Four SCSI SCA drive shuttles
• Drives Hot-swap from front
• Rear external SCSI connector and terminator
Power Supply Subsystem
• Four Hot-swap redundant power supplies
• N+1 Redundant (N=3) 200W supplies
• Dual feed power inputs
• Input Voltage: 90-132/180-250 VAC autoranging, Optional -48VDC
• Output Power: +3.3V@30A, +5V@25A,
+12V@6A, -12V@0.5A (each supply)
• Combined power of +5 and +3.3V not to
exceed 35A total per supply
Power Input Subsystem
• Dual redundant AC or DC input modules
• 10 millisecond failover time
• 3Ux 80mm deep each module
• Single AC input with embedded UPS option
Operating Environment
• Temperature: 0 to 40º C
• Humidity: 5% to 85% @40º C(non-condensing)
• Shock: 10g @11mS
• Vibration: 0.25G @2-100Hz, 1.5g@100-500Hz
Standards Compliance
• PICMG 2.0 R 3.0, PICMG 2.1 R 2.0,
PICMG 2.5 R 1.0, PICMG 2.9 R1.0,
PICMG 2.10 R 1.0, PICMG 2.11 R 1.0,
• ESD: CE
• EMI: CE, FCC, UL/CUL
• Safety: UL/CUL, CE, CB
• NEBS
Fail-Safe OPTICOOLTM Cooling
• Patented push-mix-pull cooling technology
• 8 + 2 fan, hot-swap cooling array in air intake
• Patented air flow mixing and directing tray
• 3 individually hot-swap blowers
• Optional blower and fan speed control with
I-Bus CMC
01-20-05 Rev. F
"