Continuon? 4U/ES0 pages

THE

PRODUCT LINE

www.ibus.com

Continuon™ 4U/ES
4U CompactPCI® SPARC Netra™ Blade NEBS Compliant Platform

Ordering Information

Specifications

Continuon™ 4U/ES
Standard Configuration
• C0406A NEBS Compliant Platform
• CP20x0 SBC & Rear I/O
• Sparc Processor
• 512MB ECC SDRAM
• Dual 300W AC Power Module
• Dual US Power Cords
• SCSI 36X CD-ROM
• 18GB SCA SCSI HDD
• Solaris 8 CD 6 Installed
• Product Manuals

Chassis
• 4U Height
• 7" x 17" x 17.25" (hwd)/ 178 x 432 x 438 mm

Options
(Alternatives to standard configuration
above unless otherwise stated)

•
•
•
•

Additional CP2040 Computing Blades
Additional CP2060 Computing Blades
Additional CP2080 Computing Blades
Additional CP1500 Computing Blades

• 36GB SCA SCSI Drives
• 3.5" RAID Controller
• 3.5" 40GB DAT Drive
• 4-port 10/100 Ethernet Interface
• 8-port 10/100 Ethernet Interface
• 24+2 Layer 3 Switch
• IBC-2501 Chassis Management
Controller, IPMI v.1.0 compliant Module.
• Dual 300W -48VDC Power Supplies
• UK, European or IEC Power Cords

Sun NetraTM CP 2060 SBC
• 500MHz Ultra SPARCTM IIe 64-bit processor
• Solaris 8 CD 6 Operating System
• Integrated 4-way 256KB L2 cache
• 512MB soldered on board ECC RAM
• 1MB on-board boot flash, 4MB user
programmable flash memory
• Sun Microcontroller, IPMI interface
• One PMC 32 bit 33MHz available
• Two RS-232C asynchronous serial ports
• Two USB ports
• Two 10/100 Mb/sec. Ethernet Interfaces
• Ultra-2 SCSI PMC with Rear I/O
• 1-Slot (4HP) x 6U CompactPCI Compliant
• CompactPCI Compliant Rear I/O Board
Supported SBCs
CP2040, CP2060, CP2080, CP1500
Backplane
• Integrated 6-slot CompactPCI® backplane
• Supports one or two-slot system master SBC
• 4-5 full hot-swap I/O slots
• PICMG 2.5 compliant H.110 backplane
• Additional slot for CMC in the rear

Thermal Management
• 40CFM hot-swap blower cooling for card and
drive areas
• Dual 25CFM Integrated power supply fans
Power Subsystem
• Dual 300W Hot-swap N+1 power supplies
• Dual feed power inputs
• Input voltages: 90-132/180-250 VAC
• Optional -48VDC input supplies
• Output Power: +3.3V@22A, +5V@30A,
+12V@11A, -12V@1A
• Combined total output of +3.3V and +5V
not to exceed 160W
• Optional UK, European or IEC to IEC power
cables
Operating Environment
• Temperature: 0º to 40º C
• Humidity: 5% to 85% @40ºC (non-condensing)
• Shock: 2.5G @10ms
• Vibration: 0.25G @5-100Hz
Standards Compliance
• PICMG 2.0 R 3.0, PICMG 2.1 R2.0,
PICMG 2.5 R1.0, PICMG 2.9 R1.0,
PICMG 2.10 R1.0, PICMG 2.11 R1.0
• ESD: CE
• EMI: CE, FCC, UL/CUL
• Safety: UL/CUL,CE,CB

Drive Expansion
• Up to 180Gbyte 5 SCA drive array
• 38X CD-ROM
• Optional 40GB DAT or RAID Controller

01-20-05 Rev. G