عضویت 
ورود اعضا
راهنمای خرید
Powder Actuated Installation of Flexco® SR Rivet Hinged Fasteners0 pages
Powder Actuated Installation
of Flexco® SR™ Rivet Hinged Fasteners
Safe, Portable
Installation
with Reduced
Worker Fatigue
Now Flexco® SR™ fasteners can be
installed anywhere along the belt
line with the Hilti DX 460-SR powder
actuated tool and a special Flexco steel
guide block assembly.
Safer.
The portable Hilti DX 460-SR and the Flexco MSRT application tool eliminates the
need for heavy and cumbersome installation tools. When used in combination,
operator fatigue is greatly reduced and there is reduction in noise from standard
installation methods. Plus, the DX 460-SR powder actuated tool has been approved by
MSHA for use in underground coal mines in the USA (MSHA PAD-1/02).
Easier.
This powder actuated installation method uses the standard MSRT application tool
with special steel guide block assemblies. Less effort is required to drive and set rivets
and the need for cumbersome power cords or air lines is eliminated with the self
contained power from the Hilti DX 460-SR.
Faster.
Use of the Hilti DX 460-SR powder actuated tool with the Flexco Rivet Hinged
Fastening System allows the operator to install the last mechanical splice of the day as
quickly as the first splice with minimal fatigue. Plus, the use of Flexco Rapid Loader™
Collated Rivet Strips with washers speeds the installation time of rivets into the
application tool.
Smarter.
www.flexco.com
www.flexco.com
