1675 - MICROPRO Straightener/Feeder0 pages
- 7 x 60 mm dia straightening rolls - Individual penetration adjustment of the 3 upper straightening rolls with reading on a dial - 1 pair of 60 mm dia inlet feeding rolls + 1 pair of outlet ones - POR: upper inlet and outlet roll lifting through pneumatic cylinders + sheet release for piloting through pneumatic opening of the feeding rolls and setting of motor torque to 0 - All straightening rolls are case-hardened (60 Rck) and ground - RCS: the feeding rolls are sandblasted and hard chrome plated (70 Rck) - Lower straightening and feeding rolls motorised through a cylindrical gear pair - Motorisation through brushless motor and reduction gear free from play - Inlet strip guide made up of 2 hardened vertical rollers, manually adjustable, and 2 sheet holding rolls - 2 outlet horizontal sheet holding rolls - Base made of rolled, welded steel - CRM/T: extra pitch measurement through sensor directly placed on the sheet and supervision of the slipping value between strip and rolls >
nnRANGE AND FEATURES
Model Width Thickness Straightening rolls Feeding rolls Weight Min. Max. Max.* Quantity Quantity ؘ (mm) (mm) (mm) (mm) (kg) 1675 B 300 0.6 4.0 3.0 7 60 4 60 430 1675 D 500 0.6 2.8 1.8 7 60 4 60 530 1675 F 800 0.6 1.8 1.1 7 60 4 60 680 1675 G 1000 0.6 1.4 0.9 7 60 4 60 800 >
Straightening capacities are given for a yield point Re = 300 N/mm and a tensile strength Rm = 400 N/mmҲ. * Max. thickness for max. width
DIMENSIONS
ModelL A 1675 B 300 635 1675 D 500 835 1675 F 800 805 1675 G 1000 1005 >
Non contractual pictures. May be modified without notice. This document is the sole property of DIMECO ALIPRESSE. It must not be communicated to third parties, nor used or reproduced without a written authorization. 05/2008 Version 1 www.dimeco-alipresse.com size="-2">