635 nm Red Diode Laser0 pages

MRL-III-635 /200~500mW
SPECIFICATIONS
Wavelength (nm)
635±5
Output power (mW)
RED DIODE LASER
At 635nm
>200, 300, … , 500
Transverse mode
CW
Power stability (rms, over 4 hours)
Diode red laser 635nm is made features
of ultra compact, long lifetime, low cost and
easy operating, which is widely used in
measurement, spectrum analysis, laser
lighting show, etc.
Near TE00
Operating mode
<1%, <3%, <5%
Warm-up time (minutes)
<5
M2 factor
<20
Beam divergence, full angle (mrad)
<2.5
Dimensions of beam at the aperture (mm)
~5×8
Beam height from base plate (mm)
24. 8
Polarization ratio
>50:1
Pointing stability after warm-up (mrad)
<0.05
Operating temperature (℃)
10~35
Power supply (90-264VAC or 5VDC)
PSU-III-LED
PSU-III-FDA
PSU-III-OEM
TTL / Analog modulation
Expected lifetime (hours)
140. 8(L)×73(W) ×46. 2(H) mm3, 0.6kg
10000
Warranty
MxL-III-635
Optional, 2kHz or higher (on request, up to 30kHz)
1 year
PSU-III-LED
PSU-III-FDA
PSU-III-OEM
154 (L) ×155(W) ×95 (H) mm3, 1.5kg
133 (L) ×130(W) ×65 (H) mm3, 1.2kg
100 (L) ×60(W) ×56 (H) mm3, 0.2kg
Website: http://www.cnilaser.com
E-mail: sales@cnilaser.com
Tel: +86-431-85603799
Fax: +86-431-87020258