CNI/MDL-H-915/Diode infrared laser module at 915nm/measurement, communication, spectrum analysis0 pages
MDL-H-915/2000~5000mW
SPECIFICATIONS
INFRARED DIODE LASER
AT 915nm
Wavelength (nm)
915±5
Output power (mW)
>2000, 3000, 4000, … , 5000
Near TE00
Operating mode
CW
Power stability (rms, over 4 hours)
Diode infrared laser module at 915nm
is made features of ultra compact, long
lifetime, low cost and easy operating,
which is used
in
measurement,
communication, spectrum analysis, etc.
Transverse mode
<1%, <3%, <5%
Warm-up time (minutes)
<5
M2 factor
<20
Beam divergence, full angle (mrad)
<3. 0
Beam diameter at the aperture (mm)
5~8
Beam height from base plate (mm)
29
Polarization ratio
>50:1
Pointing stability after warm-up (mrad)
<0.05
Operating temperature (℃)
10~35
Power supply (90-264VAC)
PSU-H-LED
Modulation option
TTL/Analog
Expected lifetime (hours)
10000
Warranty period
1 year
PSU-H-FDA
PSU-H-OEM
1Hz-5KHz, 1Hz-10KHz, 1Hz-30KHz, and TTL on/off
MxL-H-915
PSU-H -LED
PSU-H-FDA
PSU-H-OEM
153(L)×77(W) ×60(H) mm3, 0.9 kg
268(L) ×145(W) ×106 (H) mm3, 2.6 kg
238 (L) ×146(W) ×102 (H) mm3, 2.3 kg
238 (L) ×146(W) ×94 (H) mm3, 2.2 kg
Website: http://www.cnilaser.com
E-mail: sales@cnilaser.com
Tel: +86-431-85603799
Fax: +86-431-87020258
"