dk610 pages

Information Sheet: IPC@CHIP® DK61 Development Kit
®

The Development Kit for the IPC@CHIP SC123 and SC143 Embedded Controller
DK61 Development Kit
The DK61 contains all the hardware and software
components required for the fast development of
custom applications:
DK60 Development Board
Paradigm C/C++ Compiler (Beck IPC edition
®
for IPC@CHIP ), RTOS Remote Debugger
and other tools
CODESYS IEC61131-3 SDK for
SC123/SC143
IEC 61850 stack (Client/Server, GOOSE) and
a configuration Tool based on SCL
100-240V / 24V plug-in power supply unit for
DK60 (with adapters for international use)
2 PC programming cable (RS232 and USB)
Ethernet patch cable und cross over cable
SD card
Practical systainer
®

The IPC@CHIP DK61 Development Kit is a complete development system for the new
®
IPC@CHIP SC123 and SC143 Embedded Controllers.
In addition to the DK60 Development Board it also
contains the Paradigm C/C++ Compiler with the
®
IPC@CHIP RTOS Debugger and many other
tools required for creating C applications on the
SC123 and SC143 Embedded Controllers.
Despite the powerful hardware features of the Development Board, providing all the interfaces of the
SC123 and SC143, commissioning can be carried
out easily in a few minutes thanks to the preinstalled RTOS and the supplied “First Steps”
guide.
The extensive hardware and software features
enable customized applications to be developed
quickly and efficiently.
Programming and debugging are carried out via
Ethernet as standard, and are also possible via
RS232 or USB.
The DK61 contains the CODESYS IEC61131-3
software development kit for developing custom
IEC61131-3
PLC
applications
on
the
SC123/SC143.
IEC 61850Li (Lite implementation) integrated
The IEC-61850-compliant PIS-10 software stack
can be launched as a client and as a server. Both
applications can coexist at the same time on the
IPC@CHIP®. The stack supports IEC 61850 services including GOOSE and sampled values.
IS_DK61_EN_V8.PDF
© Copyright Beck IPC GmbH

DK60 Development Board
The development board provides on a double
Eurocard all the functions required for working with
the SC123/SC143 Embedded Controllers:
SC143-IEC Embedded Controller (96 MHz, 8
MB RAM, 8 MB Flash)
2 x RS232 (Sub-D socket)
2 x RS232/TTL (connector)
1 x USB1.1 (can be configured as host or device)
2 x CAN 2.0b
2 x Ethernet 100Base-T
MMC/SD and Compact Flash socket
Extension port for custom hardware expansions
Directly programmable I/O pins with LED indication
Power Fail and Reset buttons
Power supply, 24 VDC input
Binding of real data to IEC 61850 models by
CID file loaded to controller
®

Read more about the IPC@CHIP
product range at: http://www.beck-ipc.com

Beck IPC GmbH
Nauborner Straße 184
35578 Wetzlar/Germany

E-mail: info@beck-ipc.com
www.beck-ipc.com