SR & Intelligent Digital (CAN) sensors and accessories for use with HPM Series0 pages

SR & Intelligent Digital (CAN) sensors
and accessories for use with HPM
Series
Up to
l 750 lpm, 200 US gpm flow measurement
l 1000 bar, 14500 psi pressure measurement
Wide range of cables and accessories
All Intelligent Digital (ID) sensors use the CAN protocol and feature a LED to enable
easy identification. The SR sensors also have identification built in so the handsets can
recognise the type and size of sensor being used.
There is a wide range of cables and connectors to suit all applications. The ID sensors
are connected in-line with one another, by way of a Y cable, often resulting in shorter
cable lengths.
The CT and CTR series of turbine flow meters, provide a complete solution to the flow and
temperature measurement of hydraulic systems on test stands, machine tools and other
fixed or mobile applications. The flow meter can be installed anywhere in the hydraulic
circuit for production testing, commissioning, development testing and control systems.
The compact design allows the flow meters to be installed where space is limited.
The integral loading valve built into the CTR series provides smooth progressive
pressure control in both flow directions allowing components such as cylinders or motors
to be tested without re-plumbing the test connections.
The pressure sensors are available in six different ranges up to 1000 bar and all
measure temperature as well. The whole unit is housed in a stainless steel body, sealed
to IP67.

600 bar ID pressure
transducer

Milwaukee, WI 53235, USA
Tel: +1 (414) 769-6400
sales-us@webtec.com
St. Ives, Cambs. PE27 3LZ, UK
Tel: +44 (0) 1480 397 400
sales-uk@webtec.com

www.webtec.com

Features
Flowmeters
ltFLOW: – 1 -750 lpm
t 0.25 - 200 US gpm
ltPRESSURE: Upto
t 480 bar, 7000 psi
ltPORTING: BSPP or SAE
t BI directional operation
Flowmeters with
Loading Valve
ltFLOW: – 1 -750 lpm
t 0.25 - 200 US gpm
ltPRESSURE: Upto
t 480 bar, 7000 psi
ltPORTING: BSPP or SAE
ltBI DIRECTIONAL
operation ‘INTERPASSTM’
safety system, bypasses
oil internally in the event
of valve being over
pressurised
ltFLOWMETER
TEMPERATURE:
t -25 to 125°C (-13 to 257 °F)

ID connection
cable

Pressure transducers
ltPRESSURE: -1 to 1000
bar (-14.5 to 14500 psi)

ID Y cable

ltTEMPERATURE: -25 to
105 °C (-13 - 221 °F)

ID termination
resistor

Accessories
ltCABLES: 0.5 to 20 meter
long

Certificate No.8242

Hydraulic measurement and control

HPMACC-BU-ENG-2699.pdf
(Issue 12)

11/13