MG25 T.V.E 2CR0 pages
AUSONIA SRL
Via Piroleri 23/B 31030 – ALTIVOLE (TV) Italia
Tel. 0423 755303 - Fax 0423 759126
E mail:info@ausoniasrl.it
www.ausoniasrl.it
Partita iva 03315980262
iscr.reg. impr. TV 312041-1997
Product MG25 T.V.E 2CR
Vertical hydraulic compacting machine for compacting and shaping bales or recyclable materials such
as: cardboard paper, nylon plastic, big-bags, fibre-glass and insulation in general, expanded and soft
polyurethane, tyres, fenders and petrol tanks, polystyrene, sponge foam, PET and tetrapak bottles,
leathers, rags, cloths, generic trash, etc. ...
The model MG25 T.V.E. compacting machine features a fully-closed compacting chamber. The
materials loading and bale ejecting doors can be opened. The electrical panel is located on the side
with built-in command buttons. The material is front-loaded, the materials holding systems optimise
loading times, ensuring that the loading chamber is always empty at the end of every pressing cycle.
- Beeper announces that the bale is ready. This system lets you guarantee that the bales area all
similar to each other, in terms of weight and dimensions. The beep height is adjustable.
- Tin, can and small drum compactor platen accessory.
- Liquid containment and collection drip pan.
- Roof cover for outdoor positioning.
- ATEX directive-compliant electric panel and remote control-unit.
- Electrical panel located up high and buttons on side
- Extended cylinder to yield smaller bales.
- Addition of two transversal bindings.
- Binds with closed doors for very plastic crush-resistant materials.
- Fan-type holding system for particular materials.
- Blocks for excluding the holding systems of crushed materials.
- Dust suction and collecting hoods in loading chamber.
- Pre-varnish galvanisation to protect from any aggressive substances.
- Quick-link tying carter. Thanks to carters on the back of the machine tying is possible with
quick-link steel wire (with eyelets) while working only in front of the machine.
- Slotted front doors for closed-door binding, suited for extremely elastic return materials.
The compacting cycle (up and down compactor phases) is button-operated automatic
Bale binding is preset with open doors, it is bound manually, with highly - resistant polypropylene
banding (4 coils are supplied) . Thanks to the slots on the back of the chamber, steel wire or bands
can be used to bind.
Bales are automatically ejected by a belt fitted to the back wall of the compacting machine, which is
activated by the rising plate.
Closing the bale expelling door is done by hand wheel. This ensures safety when opening especially
with the more elastic materials.
The compacting machine can be positioned against a wall. It only needs front space for material to
be loaded and to expel the bales.
The hydraulic circuit is fitted with a safety locking valve to prevent the platen from falling.
The compacting machine is made be fastened to the ground.
The compacting machine is epoxy varnished. The standard compacting machine colour is RAL 7016
grey , moving parts and protections are RAL 1007 yellow. The colours can be changed according to
the RAL table .
The compacting machine is tested at the Ausonia works prior to being shipped. The MG25 T.V.E. is
shipped horizontally, on its side, and with a full canister of oil inside the compacting machine itself.
Upon delivery, simply straighten the compacting machine, fill the tank with the supplied oil, check
the electric motor's sense of rotation and machine is ready for use. The usage and maintenance
manual delivered with the compacting machine, and which must be read by operators prior to use,
explains every detail for every operation and the use of the machine.,
-
AUSONIA SRL - Via Piroleri 23/B 31030 – ALTIVOLE (TV) Italia - Tel. 0423 755303 - Fax 0423 759126
E mail:info@ausoniasrl.it - www.ausoniasrl.it - Partita iva 03315980262 - iscr.reg. impr. TV 312041-1997