Aerospect SPS 1000C0 pages

Aerospect SPS 1000 C Specification
General
Column Height: 2641 mm (104.00 in)
Max Diameter: 1160 mm (45.66 in)
Granite: 1524 x 918 x 254mm thick
(60 X 36 X 10 in thick)
Worktable Height: 675 mm (26.6 in)
Machine Weight: 1859 kg (4090 lbs)
Electrical Cabinet Weight: 234 kg (515 lbs)
Air Bearing
Load Capacity: 1000 lbs (455 Kg)
Optional 2500 lbs (1137 Kg)
Radial accuracy: 0.125 ìm (5 ìin)
Axial accuracy: 0.125 ìm (5 ìin)
Tilt Error Motion (coning): < 0.025 ìm/mm (< 1 ìin/in)
Tilt & Center
Tilt Adjustment: +/- 1°
Center Adjustment: +/- 3.1mm (0.125 in)
Axis of Tilt: 95mm (3.8 in) Above Worktable
Work Table Diameter: 455 mm (18 in)
optional 500 mm, 605 mm, 813 mm
(19.6 in, 24 in, 32 in)
Gage Heads (4- Std, 8- optional)
Cartridge Style: 0.375” OD, +/- 1 mm (0.040”) travel
Lever Style: +/- 0.30mm (+/-0.012”) travel
Ultra Small: +/- 0.25 mm (+/- 0.010”) travel
Measurement resolution: 0.25 ìm (10 ìin)
Note: Other Gage heads available upon request
Electrical
Encoder: 1000 line
Flat screen LCD Display
Industrial Computer
CE Approved
Printer included
Power: 120VAC-50/60hz or 220 VAC-50/60hz
Power Consumption: 500VA
Air Requirements: Pressure: 50 – 80 psig
Air Usage: 1.5 scfm @ 60 psig, (42 l/min)
NOTE: AMETEK Precitech pursues a policy of continual improvement due to technical developments. We therefore reserve the right to deviate from catalog specifications.
SPS Column
1000lbs or 2500 lbs load
capacity. 2300 mm tall
parts and assemblies may
be conveniently measured
and stacked.
* Floor plan available
on request