COMPALARM A0 pages
t2
COMPALARM A
GENERAL
The system is composed by:
1) Alarm card
2) Power supply and fl ashing card
3) Relay card
4) Timing card
5) Card holder unit
6) Power transformers and Dc/Dc converters
7) Signalling cells, SQ type (with LED on request)
It’s available in 2 different executions:
• The fi rst one being supplied with its various components
unassembled, but fi tted with their corresponding wiring
terminals.
• The second is being supplied as a prewired solution in a fl ush
mounting rack.
The fi rst solution is the most versatile either for assembling or displaying.
As far as its operation is concerned, the alarm unit (optical and acoustic
signalling) is excited, when its input contact changes its status ( i.e. When it changes
from open or normal condition to close or alarm condition). The alarm action behaviour follows the
detailed patterns given in the ISA selection table, at the page 5, according with the selected sequence. The system is also
fi tted with terminals for wiring external push-buttons for:
• Sequence test, in order to control the system’s effi ciency.
• Acknowledge, in order to intervene on the siren during its normal operation.
• For resetting the cards, which memorize the tripping of the functions.
An interesting feature of the COMPALARM A, are the interconnections available at its splittable terminal, which makes the wiring much easier, as it
allows to wire the terminal block detached from the card.
The particular position of the terminal block allows also to optimize the available space at the board.
ELECTRICAL CHARACTERISTICS
Auxiliary power supply
24-48-110-220-380
Operating contact voltage
18 ÷ 38 V
Current input
4mA Aproximately
Electronic circuits consumption
Negligible compared to that of the lamps
Optical signalling output
250 mA max
1 change-over contact for acoustic signalling
10 A - 250 Va.c. Resistive load
Output relay for remote control 1 change-over
10 A - 250 Va.c. Resistive load
Remote repeating output relay (for all points) 1 change-over load
10 A - 250 Va.c. Resistive
Static output for remote control of the relay
24 Vc.c - 250 mA max
Flashing frecuency
1F Slow frequency
2F Fast frequency
1÷1,5 Hz
2÷3 Hz
Power of transformers a.c./a.c.
30-50-100-200 VA
Power of converters d.c./d.c.
50-100-250 W
Working temperature
-10°C ÷ 60°C
Storing temperature
-20°C ÷ +80°C
Relative Humidity
90%
Isolation test
2kV 60 seg
"