Typhoon0 pages

W W W . S I M C O - I O N . N L

Industrial Static Control

Typhoon
Ionizing airknife, blower driven
Simco-Ion’s Typhoon airknives eliminate static and removes particulate from flat or contoured surfaces.
Typhoon incorporates a high-velocity blower with a deep penetration airknife. This system provides a
continuous stream of clean ionised air for removal of surface particulate and contamination. The Typhoon
is adaptable to large halo systems used for auto and truck body cleaning prior to painting.
It is also extremely suitable for smaller pre-paint cleaning systems for plastic parts and fascia. By using
blowers instead of compressed air, Typhoon can reduce operational costs by 30 to 70%.
The airknife is constructed of extruded aluminium with incorporated mounting grooves. This design
provides a precise air volume over the entire width of the airknife. In the airknife tube a high air pressure
appears and is flowing out of the airknife narrow outflow opening. The anti-static bar produces positive
and negative ions which are blown onto the surface by the airknife. The electrons will now be exchanged,
which causes the surface to be neutralised and the impurities to be removed. For use in hazardous zones,
the Typhoon with the P-Sh-N-Ex anti-static bar is approved.

Power unit A2A7M
Typhoon systems with EP-Sh-N anti-static bars incorporate a power unit type A2A7M. This unit contains
an additional 12V power source for connection of the airpressure sensor.

Features
•t

Incorporates Simco-Ion anti-static bars which quickly neutralize static, facilitating easy removal of
particulate

•t

Clean, uniform, high-velocity ionised air provides “one-step” cleaning

•t

Direct-drive motors require little or no maintenance

•t

Anodised finish for corrosion protection

•t

Connection for pressure sensor

•t

New design extruded aluminium profile

•t

Cost efficient versus compressed air

•t

Two mounting grooves

•t

Small blower / low noise level