EZstripâ„¢ Transfer Pump0 pages
EZstrip
Transfer Pump
™
The patented split coupling
provides a quick and easy
way to disassemble and
maintain a progressing cavity
pump in place.
Typical Applications
>tDomestic and industrial effluent
>tHydrated lime slurry
>tSludge
>tShear sensitive latex emulsion
>tMilk curds, sauces, fruit juices
>tIndustrial chemicals and detergents
>tStarch slurries
>tCoating clays, gypsum and silicate
>tPaper stocks
>tAgricultural slurries
Capacity
>tup to 727 gal/min
Pressure
>tup to 174 psi
Temperature
>t14°F up to 212°F
Features & Benefits
Maintain-in-Place
Full drive train including rotor,
stator, shaft, rod, and seal can be
removed in minutes with no electrical
disconnection required.
Time Savings
Reduce maintenance time from eight
hours to thirty minutes and de-ragging
time from four hours to six minutes.
Drive Train Assembly
Pre-assembled drive train available
with 2-year warranty to allow a faster
reassembly time.
Eliminate Dismantling Lengths
Suction and discharge ports remain
connected to the pipe work.
No De-Rating Needed
Operation parameters unaffected
since design has no effect on flow and
pressure.
Low running speeds
Reduced wear for a longer working
pump life which extends the periods
between routine maintenance. Think
of the savings that could be realized on
abrasive applications.
Interchangeability
Compatible with new pumps or
retrofitted into existing Compact C and
B-Range installations.
Reduce Cost of Ownership
Minimize spares consumption due
to easy de-rag and less dry run
occurrences.
No Special Tools Needed
Pump requires only a wrench and an
allen key to maintain.
Materials of Construction
Available in cast iron or stainless steel
with a choice of rotor and stator
materials to suit individual applications.