Portable Pump Filters Datasheet Specs0 pages
PORTABLE PUMP/FILTER UNIT CLEANS
CHIPS & SLUDGE FROM CUTTING OIL OR COOLANT
Thousands in Service • Shipped UPS from Stock
Keeping Solids Level Low in Sumps:
• Greatly increases tool life, minimizes tool breaking
due to dirty fluid
• Eliminates parts finish problems
• Reduces burden on high pressure filter
• Minimizes downtime and labor for manually
cleaning sumps
Keller Portable PFA-1002 Unit:
• Pulls from sump and continuously returns filtered
fluid to the sump at high flow rate
• No need to pump out sump or shovel solids
• Cleans a typical sump in minutes, then can easily
be moved to the next sump
• Portable PFA-1002 keeps multiple sumps clean
• Also filters and recycles fluid from chip spinners or
chip compactors
• Air-operated—No electricals—Inherently fireproof
How the PFA-1002 Works
The PFA-1002 contains a large bag filter and a high flow 1" air
operated diaphragm pump, mounted on a cart. The 8-foot inlet
and outlet wands, consisting of 5 feet of flexible hose and 3 feet
of rigid pipe, can access all corners of the sump. With both
wands inserted in the sump, the force of the filtered liquid
discharge scours the bottom of the sump to suspend chips and
sludge for pickup by the inlet wand. With a 20 gallon per minute
recirculation rate, the PFA-1002 cleans a typical sump in minutes
and then can easily be moved to another sump and set up simply
by connecting a 1/4" compressed air line.
"...The PFA-1002 is rugged and easy to use. It works
exactly as described, with negligible operating cost, and has
eliminated several costly problems. No more pumping out
sumps, no more problems of fines affecting parts finishes,
no more short runs with the high pressure coolant filter..."
—Marox Corp.
Complementary Products from Keller
• Flow-through Magnetic Separator can be installed on inlet to
PFA-1002 to remove the bulk of steel & iron particles
• In-line Coolant Filter with permanent cleanable filter element
protects through-the-spindle tooling
Keller specializes in equipment to maintain clean
metalworking fluids. Call Keller for recommendations.
"...For a modest investment, the two PFA-1002 units have
allowed me to increase shop throughput, avoid unscheduled
shutdowns, eliminate parts finish problems, and greatly
reduce labor costs for sump maintenance..."
—CSI Manufacturing
Ordering Information
PFA-1002
RCP-25
RCN-100
Ordering Designation
Includes all hoses, cart, and five 25 micron filter bags
Additional Filter Bags:
Box of five polyester felt bags, 25 micron
Box of five nylon mesh bags, 100 micron
Note: Other filter bags from 5 micron to 100 micron available
Specifications PFA-1002
Flow Rate 20 gallons per minute
Compressed air requirements 5 SCFM @ 20 to 125 psig
Electricals None
Dimensions of cart 20" x 30"
Shipping Weight (Shipped UPS) 100 lbs
Kvllnr PmrinrtG Inn Tei.1-800.352.8422,outsiders.pry264-wu
f\t?ffC7f II UUUUl&j I ill*. www.kellerproducts.net Fax (978) 264-0221
Bulletin K4106
"