TKE 984 Machining centre0 pages

En #1

Tool magazine

TKE 984

01

Clamps

02

Machining centre
ex TK 441/3

01

02

03

05

Mobile gantry CNC 4-axis machining centre, designed for drilling, milling, threading
and cutting at any angle from -90° to +90° on bars or pieces in aluminium, PVC, light
alloys in general and steel. The mobile part of the machine mainly consists of a
gantry equipped with precision motorisation rack. The 9 kW electrospindle with HSK63F tool connection is able to perform even heavy-duty machining with excellent,
rapid and accurate results. A fixed tool magazine with 14 places is installed on the
left-hand side of the machine. It can be fitted with a second 14-place magazine on
the other side of the machine or replaced by a single 14-place motorised magazine
which, with its own NC axis, follows the mobile gantry in the two work areas, reducing
the required number of tools and tool holders and considerably optimising
programming.
The machine can be used in double mode, a work method that reduces machine
stop times to a minimum as it allows workpiece change time (loading/unloading) to
be run "while the machine is operating". Furthermore, different workpieces can be
machined between the two work areas.
The machine is equipped with a cabin covering of the gantry that not only protects
the operator, but also reduces the noise impact.

Dimensional profile
measurer (optional)

03

Electric head

04

The pictures are provided by way of illustration only

Profile positioning

05