Comark 10-port Managed Industrial Ethernet Switch| CK60xx/70xx,monitor system0 pages

Shenzhen Comark Technology Co.,Ltd.

Innovation, Quality, Service

10-Port Managed Ethernet Switch

10 ports 100M/1000M combined managed Ethernet switch
Managed with Web, CLI and SNMP, CLI can login with Telnet and CONSOLE
QoS, IGMP, 802.1Q VLAN to ease network planning
RSTP and CK-ring for network redundancy, recovery time < 20ms
Warning by relay output for power, ports and network status
Metal housing with IP30 protection, EMC industrial level 4 supported
Wide range voltage redundant dual inputs, full-load power consumption < 10W
DIN-Rail Mounting and Wall Mounting supported
Standard operating temperature 0℃~70℃, wide operating temperature optional
( -40~85℃) to satisfy harsh industrial environment

Product Overview
10-Port Managed Ethernet Switch is designed for flexible industrial circumstances and provides a high cost performance Ethernet
solution. You can manage it by powerful features with WEB browser, Command Line (CLI) and SNMP. It also supports redundant
dual inputs with wide range voltage12~48V DC to improve the reliability. 4~8 10/100BaseT(X) RJ45 ports, 0~2 1000M SFP
ports and 0~4 100BaseFX fiber ports can be combined according to your requirements. Furthermore, DIN35 or wall mounting is
provided for distinct industrial installation.

Features
mode setting, flow control

Basic Switching Features
QoS/IGMP/802.1Q/802.1p/802.3, store-and-forward

Port Mirroring to debug online or monitor the data
status

switching
0~8个10/100BaseT(X) RJ45 ports, Auto-Negotiation
speed
10M/100M
,auto Duplex mode and MDI/MDI-X

Rate-limit to optimize the bandwidth of network
Port trunking to expand the bandwidth and improve the
efficiency of the network

connection
0~4 100BaseFX 100M full Duplex fiber ports (default

QoS setting to improve the quality of the service
Port MAC-address learning and statistics

SC port, FC/ST optional), max to 120km

802.1Q VLAN to control multicast domain

0~2 1000M SFP port, 1000M fiber port or RJ45 port

Unicast/multicast MAC-address management

module selective

IGMP Snooping to filter multicast traffic

Broadcast storm control

SNMP V1/V2C/V3 improve the security of network

Metal housing with IP30 protection and EMC industrial

management in different level

level 4

RSTP to avoid indefinite message copy in the ring

Wide range power voltage with 12~48V DC inputs, full

Auto-recovery redundant CK-Ring full-load failure

load power consumption less than 10W

recovery time < 20ms , supports Single-Ring,

Advanced Industrial Ethernet Network Features

Tangency-Ring and Intersection-Ring

Web, CLI and SNMP management, CLI can login with Telnet

Warning by relay output

and CONSOLE
Port setting, e.g., Enable/disable the port, speed or

Rich network system management

www.comark.cn

1