JCP 1724 Jet Cleaner0 pages

JCP 1724 Jet Cleaner
Remove Polymers and Compounds
from Metallic Parts

Suitable for removing from metal
parts and extrusion hardware all
types of thermoplastic and
thermoset compounds in a safe,
ef cient manner without the use
of cleaning media.

ene ts
Capable of removing most
polymeric materials
Fast cleaning cycle
Simple operation
Reliable and maintenance-free
operation
Gentle cleaning extends part life
Operator safety
Energy-saving operation
Labor saving
FEP - OPTIONAL UNIT AVAILABLE

Safety
Since cleaning takes place under
vacuum, combustion does not
occur. This feature provides a high
degree of operator safety and the
parts are equally protected from
excessive or localized high temperatures, insuring freedom from
annealing and stress cracking.

The Model JCP 1724 Jet Cleaner with working dimensions of 15 ½ “ and
23 ½” depth (393.7 mm and 596.9 mm) depth represents one of the most
popular model sizes of the Nordson XALOY Jet Cleaner product line.
It is ideally suited for small to intermediate size cleaning applications. All Nordson XALOY
Jet Cleaners utilize heat and vacuum to remove material such as thermoplastic from
metal parts. In most cases cleaning cycles are accomplished within 120-240 minutes
at an operating temperature range between 800°F and 900°F (426.7°C and 482.2°C)
and a vacuum of 25 inches (635 mm) of mercury. The unit can be easily installed in
any area having available facilities of water supply, water drain and electrical power.

Operation

are heated in an oxygen starved

depressurized and the heaters

chamber where the polymer melts

and vacuum pump shut down.

Cleaning is totally automatic.

and drains into the primary trap

The operator then simply opens

Environment

The operator loads the parts into

collector pan. Remaining polymer is

the chamber door, removes the

Clean your tooling by removing
material, not burning it away.
Cleaning in an oxygen starved
chamber eliminates combustion
and minimizes environmental
impact. Consult our Environmental
Report for additional details.

the parts tray, moves the carriage

vaporized and then water scrubbed

cleaned parts, checks and cleans

assembly to the operating position,

in a secondary trap where conden-

the traps if necessary and the unit is

secures the door, sets the cycle time

sates are collected in a secondary

ready for another cycle.

and temperature, starts the unit and

trap basket. At the end of the

walks away. The parts to be cleaned

cycle the chamber is automatically