Vacmobile 20/20 pages
25
years
20/2
Vacmobile 20/2
20 m /h pump capacity
2 litre catchpot
3
For Resin Infusion | RTM Light | Vacuum Bagging | Double Bag Infusion
Mobile vacuum system with integrated resin trap
The original Vacmobile, the 20/2 mobile vacuum system is a proven
performer ideally suited to resin infusion or vacuum bagging
composite parts, where the resin overflow from the part will be less
than 2 litres (4 pints).
Don’t be fooled by its compact size – the Vacmobile 20/2 can successfully
resin infuse vacuum bagged products as large as 185 m² (2,000 ft²) when
supplemented by a larger (optional) resin trap. The Vacmobile 20/2 arrives
ready to run on single phase power, so there’s no costly installation or
complicated set up. Exceptionally mobile, the Vacmobile 20/2 allows you to
get much closer to your work, where the vacuum is needed the most, which
means greater performance and lower operating costs.
Collapsed down
for transport
The Vacmobile 20/2 vacuum system arrives complete with an integrated
resin trap, vacuum gauge, vacuum regulation, coarse particle filter
and motor overload protection. It is robustly constructed from proven
Vacmobile components, including our unique O-ring sealed trap lid tubing
connections, assuring vacuum integrity over a long working life.
Very versatile: Single & Dual vacuum levels
The Vacmobile 20/2 has an optional Dual-Vac accessory that seamlessly
converts the standard single vacuum level 20/2 into a dual vacuum
machine suitable for small RTM Light and double bag infusion processing.
This added scope is ideal for laboratories and training facilities where a
range of processes need to be demonstrated, or for small manufacturers
who are focussed mostly on infusion projects, but occasionally need the
ability to undertake Light RTM jobs.
Collapsible for transporting
The Vacmobile 20/2’s normal working height of 1065 mm (42”)
can be easily reduced to 620 mm (24.4”) making it simple to move
between working locations.
Ruggedness proven in more than
50 countries since 2006
1t Silenced vacuum regulation valve
2t Instant vacuum release button
3t Vacuum tubing restraint. Holds tubing from resin trap horizontally or vertically,
as required
4t Valves mechanically locked to manifold. Cannot loosen or leak
5t Manifold machined from solid aluminium block
6t Manifold physically locked to main handle of machine. Cannot loosen in
service
7t O-ring sealed connection to resin trap
8t Convenient working height handle and manifold. Can be compacted down
for transport