Optical RDO PRO-X Dissolved Oxygen Probe for Process Monitoring Applications0 pages
Innovations in
Water Monitoring
Optical RDO® PRO-X Dissolved Oxygen Probe
The In-Situ® Rugged Dissolved Oxygen (RDO)
PRO-X Probe uses optical technology for
measuring dissolved oxygen (DO) in demanding
process environments. The U.S. Environmental
Protection Agency (EPA) has approved In-Situ RDO
methods for use in Clean Water Act programs.
NPDES permit holders can use the RDO PRO-X Probe and
Con TROLL® PRO System for monitoring influent, effluent, and
treatment processes. Visit the In-Situ website for details and
start using breakthrough technology.
Robust Construction
•t
•t
•t
Accurate Results
•t
•t
Simple Design
•t
•t
•t
Automates setup and reduces user error—Calibration
coefficients and expiration clock are loaded into sensor cap.
Eliminates membranes and filling solutions
Flexible communications—Standard 4-20 mA, Modbus/
RS485, and SDI-12 outputs
Cost Effective
•t
•t
•t
Runs aerators efficiently and mitigates risks
Eliminates the need for a costly transmitter or controller,
and requires only 8 to 36 VDC power
Includes complete instrument with a standard 10-m cable
Resists abrasion and photobleaching effects
Withstands high salinity environments—Inert, non-corrosive
materials used to construct probe body and sensor
Insensitive to interferences that plague membrane-based
sensors (hydrogen sulfide, chloride, ammonium, and others)
•t
•t
•t
Includes diagnostic tools to help you evaluate sensor health
Provides ±0.1 mg/L accuracy from 0 to 8 mg/L; ±0.2 mg/L
accuracy from 8 to 20 mg/L; and ±10% of reading from
20 to 50 mg/L
Operates with very low drift for long periods of time
Responds quickly to oxygen and temperature changes
Delivers consistent, reproducible results (<0.05 mg/L)
Applications
•t
•t
•t
•t
Municipal/industrial water and wastewater treatment
Food/beverage process control
Aquaculture settings
Dam discharge monitoring