Flow Coat Primer System0 pages
Flow Coat Primer System
Automated film coating delivers accurate, uniform and repeatable
primer application to body flanges and glass.
Features and Benefits
t
Excellent edge definition without overspray
is achieved because the primer material is not atomized.
Masking and rework are virtually eliminated.
t Variable pattern width is available with a wide range
of nozzles to meet specific application requirements.
t Compact, lightweight applicator tool is easy
to install and service.
t Material flow and application verification
assures application of primer.
t Recirculation feature and nitrogen blanket
help prevent material degradation.
The Nordson® Flow Coat primer system robotically applies
material in a controlled, uniform film, rather than an
atomized spray. The material is dispensed as a ribbon-like
coating, virtually eliminating masking and the rework
associated with atomized spray application methods.
The Flow Coat process provides excellent pattern definition
and placement while achieving film thicknesses up to 8 mils
in a single pass. Speeds of up to 1200 mm per second are
easily achieved, dramatically reducing cycle times.
The Flow Coat system applies primer in a nonatomized film
pattern. In body flange applications, the Flow Coat system
delivers precise and uniform application with minimal
dripping. This allows manufacturers to reduce material
consumption dramatically compared to manual application
methods. Operator exposure to hazardous solvent vapors is
also minimized.
Patented Dispensing Technology
The Flow Coat system applies the primer to the substrate
prior to the atomization point of the film. Material is
directed under low pressure through a patented nozzle
which produces a film pattern with edge definition of +/-1
mm. A variety of nozzles are available to meet application
specific pattern widths.
The Flow Coat System applies primer
in a non-atomized film pattern