عضویت 
ورود اعضا
راهنمای خرید
VXI-ST0 pages
DETECTION AREA
DIMENSIONS
SIDE VIEW (Detection Distance by Positions)
Position 1 : Approx. 12m/40ft (Default)
0 5m 10m 12m
Position 2 : Approx. 8.5m/27.9ft
The actual detection
distance is dependent
on the thermal conditions
within the given environment.
□ 5m 10m 12m
Position 3 : Approx. 6.0m/19.7ft
TOP VIEW
(Area diagram for D position)
0 5m 10m 12m
Position 4 : Approx. 3.5m/11.5ft
0 5m 10m 12m
Position 5 : Approx. 2.5m/8.2ft
SPECIFICATIONS
Model | VXI-ST | VXI-AM | VXI-DAM |
Detection method | Passive infrared | Passive infrared & Microwave | |
PIR coverage | 12.0 m (40 ft) 90° wide /16 zones | ||
PIR distance limit | 12-2.5 m (5 levels) | ||
Detectable speed | 0.3-1.5 m/s(1 -5ft/s) | ||
Sensitivity | 2.0'C (3.6°F) at 0.6 m/s (2 ft/s) | ||
Power input | 9.5-18 V DC | ||
Current draw | 20 mA (max) at 12 V DC I 24 mA (max) at 12 V DC | 35 mA (max) at 12 V DC | ||
Alarm period | 2.0 ±1 sec. | ||
Warm-up period | Approx. 60 sec. (LED blinks) | ||
Alarm output | N.C. / N.O. Selectable 28 V DC 0.1 A (max) | ||
Trouble output | N.C. 28 V DC 0.1 A (max) | ||
Tamper output | N.C. 28 V DC 0.1 A (max) open when cover removed. | ||
LED indicator | Red: Warm-up, alarm, masking detection (VXI-AM only) | Red: Warm-up, alarm, masking detection. Yellow: Warm-up, MW detect. | |
RF interference | No alarm 10V/m | ||
Operating temperature | -30 - +60°C (-22 - +140°F) | -20 - +45°C (-4 - +113"F) | ||
Environment humidity | 95% max. | ||
International protection | IP55 | ||
Mounting | Wall, Pole (Outdoor, Indoor) | ||
Mounting height | 0.8-1.2m (2.64 ft-3.94 ft) | ||
Weight | 500 g (17.7 oz.) 600 g (21.2 oz.) | ||
Accessories | Screw (4*20 mm) *2 , Wiring sponge "3 , Masking seal "3 | ||
Model | VXI-R | VXI-RAM | VXI-RDAM |
Detection method | Passive infrared | Passive infrared & Microwave | ||
PIR coverage | 12.0 m (40 ft) wide /16 zones | ||
PIR distance limit | 12-2.5 m (5 levels) | ||
Detectable speed | 0.3-1.5 m/s (1 -5ft/s) | ||
Sensitivity | 2.0°C (3.6"F) at 0.6 m/s (2 ft/s) | ||
Power input | 3 - 9 V DC(Lithium or Alkaline Battery) | ||
Current draw | 9uA (standby) / 4 mA (max) at 3 V DC | 10uA (standby) / 4 mA (max) at 3 V DC | 18uA (standby) / 8 mA (max) at 3 V DC |
Alarm period | 2.0 ±1 sec. | ||
Warm-up period | Approx. 60 sec. (LED blinks) | ||
Alarm output | N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A(max) | ||
Trouble output | N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A(max) | ||
LED indicator | Disable: During normal operation. Enable: During WALK TEST or LED SW on. Red: Warm-up, alarm, masking detection (VXI-RAM only) | Disable: During normal operation. Enable: During WALK TEST or LED SWon. Red: Warm-up, alarm, masking detection. Yellow: Warm-up, MW detect. | |
RF interference | No alarm 10V/m | ||
Operating temperature | -20-+60°C(-4-+140°F) | -20-+45°C(-4-+113°F) | ||
Environment humidity | 95% max. | ||
International protection | IP55 | ||
Mounting | Wall, Pole (Outdoor, Indoor) | ||
Mounting height | 0.8-1.2 m (2.64 ft-3.94 ft) | ||
Weight | 500 g (17.7 oz.) 600 g (21.2 oz.) | ||
Accessories | Connector for POWER and ALARM, Connector for TROUBLE, Screw (4«20mm) «2, Masking seal *3 | ||
* Specifications and design are subject to change without prior notice.
** R & TTE certified : -20 to +45°C (-4 to +113°F)
Without a back box (VXI-ST / AM / DAM)
70.9(2.80) 64.5(2.54)
181.9
(7.16)
With a back box (VXI-R / RAM / RDAM)
71.3(2.81)
105.5(4.15) Pitch=83.5
(3.29)
185.9
(7.32)
OPTIONS
VXI-T-Bracket
Unitmm(inch)
BATTERY BOX (RBB-01)
"VXI-DAM and
VXI-RDAM can
not be used
due to
microwave
interference.
'Battery not included.
CR123Ax3(3.0VDC)
CR2x3(3.0VDC)
1/2AAx3(3.6VDC)
1/2AAx6(7.2VDCx3)-
"3.6 VDC 1/2 AA battery in series.
Wall Tamper (WRS-02)
for ST, AM, DAM models
Wall Tamper (WRS-04)
for R, RAM, RDAM models
"Not applicable for a use of a set of dual technology models (DAM & RDAM).
Plug in EOL(End of line) Resistor Modules
for wired models
Different values of EOL resistances can be instantly set by
plugging in optional modules. Please refer to the relevant
control panels manual to confirm matching resistance values.
PEU-A(PACK)
Alarm: Z.2kU / Tamper: 4.7kll / Trouble: 2.2W5
PEU-B(PACK)
Alarm: 4.7W3 / Temper: 4.7kQ / Trouble: 6.8kO
PEU-C(PACK)
Alarm: 1 .OkD / Tamper: 1 .Okfl / Trouble: 12k0
PEU-D(PACK)
Alarm: 1.0kO / Tamper: 1.OkQ / Trouble: 3.0kO
PEU-E(PACK)
Alarm: 1.1kO/Tamper: 1.1kD/Trouble: 15kQ
PEU-F(PACK)
Alarm: 5.6kfl / Tamper: 5.6kQ / Trouble: 5.6kD
j. c (, r J. ^ |
□PTEX
OPTEX CO., LTD. (JAPAN)
URL: http://www.optex.net/
OPTEX INC. (U.S.)
URL: http://www.optexamerica.com/
OPTEX DO BRASIL LTDA. (Brazil)
URL: http://www.optex.net/br/es/sec/
OPTEX (EUROPE) LTD. / EMEA HQ (U.K.)
URL: http://www.optexeurope.com/
OPTEX TECHNOLOGIES B.V.
(The Netherlands)
URL: http://www.optex.nl/
OPTEX SECURITY SAS (France)
URL: http://www.optex-security.com/
OPTEX SECURITY Sp.z o.o. (Poland)
URL: http://www.optex.com.pl/
OPTEX PINNACLE INDIA, PVT., LTD. (India)
URL: http://www.optex.net./in/en/sec/
OPTEX KOREA CO..LTD. (Korea)
URL: http://www.optexkorea.com/
OPTEX (DONGGUAN) CO.,LTD.
SHANGHAI OFFICE (China)
URL: http://www.optexchina.com/
No. 77040-01-15747-1403
□PTEX
Sensing Innovation
A WORLD LEADING
0DTD00R DETE
□ Flexible Detection Patterns
□ Expanded Features in a Down-sized Bo
□ Digitally Enhanced Reliability
4
YX Infinity series
WIRED MODEL BATTERY OPERATED MODEL
BATTERY OPERATED MODEL
VXI-ST : 12m wide 2PIRs standard VXI-R : Battery operated 12m 2PIRs
VXI-AM : Anti-masking VXI-RAM : Battery operated Anti-masking
VXI-DAM : 2PIRs with Microwave VXI-RDAM : Battery operated 2PI
"
