UltraSECURE - Steel Palisade Fencing With Infill0 pages

Specifications

SECURITY FENCING

DATASP03F

TYPICAL CONSTRUCTION FOR UltraSECURE
2750mm

UltraSECURE

2750mm 17 pales

2
100

1

PALISADE
FENCING SYSTEM

6
=

HEIGHT
Fencing is supplied to BS1722 Part 12 : 1999 in
a standard range of 1.8, 2.0, 2.1, 2.4, 3.0 and 3.6
metre heights.

5

In addition non standard fence configurations can
be manufactured for specific requirements.

=

8
3

100

N.B. UltraSECURE requires a 3rd rail as shown,
which must be a bolted construction.
KEY

7

1. Fish plate to which Top and Bottom Rail are
fixed using M12 anti-vandal fixings.
2. Top Rail - UltraRAIL™ to which pales are
fixed using UltraBOLT or UltraRIVET.
3. Bottom Rail - UltraRAIL™ to which pales
are bolted using UltraBOLT or UltraRIVET.
4. Top and Bottom rail - to which vertical bars are
fixed using anti-vandal non-visible rear fixings.
5. Standard UltraPOST’s™.
6. Fencing Pale: UltraPALE™.
7. Concrete foundation.
8. Perforated panel/Solid panel.

PALING HEADS

We supply a selection of heads that can be used
with our fencing systems and care should be taken
to select the correct head to suit the requirement
needed for your project.
TRIPLE
POINTED

ROUND TOP
& NOTCHED

SINGLE
POINT

ROUND
TOP

FLAT
TOP

FIXINGS
M8 UltraBOLT: M8 bolt with tamper proof
snap off cone nut, suitable for use with general
purpose (GP) and security palisade fences (SP).

M8 RIVETS:
M6 RIVETS:

8mm rivets with collars.
Available upon
request (does not
comply with
BS1722 Pt12: 1999)

www.hadleygroup.co.uk
SECTIONS & PROFILES

JRD/SP0001

Gaitskell Way, Dartmouth Road, Smethwick, west Midlands B66 1BF
Telephone: +44 (0) 121 555 1430
Fax:
+44 (0) 121 555 1431
E-mail:
sp@hadleygroup.co.uk