Comark CC signal converters|Ci-kf11/12 for Monitoring system0 pages
Shenzhen Comark technology Co., Ltd.
Cj-vf series datasheet
CC signal converters
Products description:
Cj-kf series products are a type of multi-channel analog signal, the digital signal, serial
ports RS232/485/422 fiber conversion multiplexing equipment. It adopts the latest ARM
chip, which is quite stable, reliable low power, supports 1 ~ 4 channels the digital TTL
signal/contact closure signal, 1 ~ 4 channel analog (voltage/current), 1 ~ 2 channel
RS232/485 or a channel RS422 signal in the fiber alone or multiplexing transmission. It
requires no change of the user communication protocol solves the problem of
electromagnetic interference, ground ring interference thunder destroys, which greatly
improve the signal reliability, safety confidentiality, at the same time solve the problem of traditional mode of short
distant transmission. Protection grade is IP30, strengthen cabinet, 35mmDIN guide installation, industrial stard DC24V
power supply, possess the protection function of power polarity reverse connect.
Performance index:
Contact closure signal/TTL digital signal interface:
Ø Independent 1 ~ 4 channel input, 1~4 channel output
Ø Input mode can be elected by TTL input or dry contacts input
Ø TTL input level: input level + (0 ~ 1) V/logic "0", input level + (5 ~ 30) V/logic "1"
Ø Dry contacts input: short circuit or open
Ø Output modes: the optional for 5V TTL / 24V TTL output, or relay output
Ø Relay output form: FORM CSPDT:
Relay-operating time
6ms
Relay release time
3ms
Total switch time
10ms
Relay contacts capacity 1A/24VDC
Ø Transmission delay time: 2 milliseconds
Ø The maximum working switch frequency: 50Hz
Fiber optic interface:
Ø Fiber optic wavelength:multimode850nm、1310 nm; single mode1310 nm、1550nm
Ø Transmission fiber optic: multimode 50/125 um、62.5/125 um、100/140um;single mode8.3/125 um、
9/125um、10/125um
Ø Transmission range: multimode 2Km, single mode 20Km. Optional in far distance
Ø Fiber interface type: ST, SC, FC optional, with standard ST light interface
Power and protection:
Ø PowerIndustrial standard24V+/-5%power supply, Possess the power meter protector against fraud
function, 5-pin Pluggable Screw Terminal
Mechanical feature:
Ø Overall dimension146mm×135mm×53mm (H*W*D)
Ø Shell:IP30 Grade of Protection
Ø Installation Method: 35mmDIN rail installation
Website: www.comark.cn