HXV Series - High Voltage Switching Systems0 pages
BULLETIN
HXV (v5)
HXV SERIES
HIGH VOLTAGE SWITCHING SYSTEMS
The HXV Series are computer controlled switching systems designed for High Voltage applications. Standard systems handle signals up to 5000 volts, while custom systems switching up
to 25 kV are possible. Typically applications include Hi-pot and high voltage IR testing.
HXV/128 Mainframe with
keypad manual control
FEATURES:
• Standard relays hot switch up to 3500 volts or 3 amps, carry 5000 volts and 5 amps.
• Customized systems switch up to 40 kV.
•t Front panel LEDs show switch status and aid in debugging.
•t Computer Control via Ethernet LAN, combined IEEE488/RS232 Serial or TTL.
•t Remote Status feedback to controlling computer.
•t Manual Control option for use without computer control.
CHASSIS:
The HXV Units are 19" rack mounted chassis, and are available as either mainframes or expansion chassis that are pre-wired to
accept any of the HXV Series high voltage switch modules. All chassis have front panel LEDs showing open and closed switch
points. Signal I/O connectors protrude through the rear panel.
HXV/32 Mainframe or -E Expansion Chassis -- 32 relay drives allow four HXV/8x1 or HXV/4x2 modules to be installed, or two
HXV/8K modules. The chassis height is 5.25".
HXV/96 Mainframe or -E Expansion Chassis -- furnishes 96 relay drivers, controlling up to 12 HXV/8x1 or HXV/4x2 modules,
or six HXV/8K Switch Modules in a 7" high chassis.
HXV/128 Mainframe or -E Expansion Chassis -- Up to 128 relay drives. Controls up to 16 HXV/8x1 or HXV/4x2 modules, or
eight HXV/8K modules in a 10.5" high chassis.
Expansion Chassis - Up to 16 expansion chassis are run from a single Mesa Controller, allowing systems with up to 8096 switch
points to be built. HXV chassis can be mixed with other Cytec products to provide a complete turn-key switching solution.
SWITCH MODULES:
HXV/8x1 Modules -- Individual modules can be wired together to build larger 1xN multiplexer configurations. Interconnects
are located either externally or inside the chassis using screw terminal connectors built into the switch modules.
HXV/4x2 Modules -- Are used to build 2xN matrices. Useful for HiPot testing and Insulation Resistance testing where Hi
and Low must be switched between any two of many measuring points.
HXV/8K Modules --- Furnish 8 SPST discrete relays which can be externally interconnected to form various configurations.
HXV- 5
25
"