CDi 15020 pages

CDi 1502
Technical Data Sheet
Inverter-Capacitor
Charging Technology
Maximum welding rates
Minimum energy consumption
Minimum weight
Maximum efficiency
Only power unit in its class (66.000 µF), which officially fulfills the
requirements of the Technical Bulletin 0903 „Capacitor-discharge stud
welding with tip ignition“ for studs diameter M8 with a required charging
voltage of 220 V.
CDi 1502
Stud Welding Unit (with digital display)
For CD stud welding (capacitor discharge welding)
according to current standards
Technische Daten
Automatic
Option
Welding range
Studs M3 to M8, dia. 2 to 8 mm; cupped head pins dia. 2 and 2.7 mm;
insulation pins dia. 2 and 3 mm
Welding material
Mild steel, stainless steel, aluminium and brass
Welding rate
M3 = 40 studs/min. (Charging voltage 60 V)
M8 = 14 studs/min. (Charging voltage 200 V)
M8 = 12 studs/min. (Charging voltage 220 V)
Capacitance
66,000 µF
Welding time
1 to 3 msec
Energy
1,600 Ws
Charging voltage
50 to 220 V (stepless voltage regulation)
Primary power
230 V, 50/60 Hz, 10 AT
Power source
Capacitor
Cooling type
F (temperature controlled cooling fan)
IP-code
IP 23 (92-10-1502), IP 21 (92-10-1504)
Dimension L x W x H
400 x 205 x 250 mm (without handle)
Weight
14 kg
Order No
92-10-1502
92-10-1504 (Automatic)
General Information
Application
Especially suitable for thin sheets (at least 0.5 mm)
ISO – especially suitable for fixing heating, ventilation and air-conditioning mats (HVAC)
Process variants
Contact welding
Gap welding
HBS BolzenschweissSysteme GmbH & Co. KG
Felix-Wankel-Strasse 18
85221 Dachau / Germany
Phone +49 (0) 8131 511-0
Fax +49 (0) 8131 511-100
post@hbs-info.com
www.hbs-info.com