Conax Fittings – Complete Guide to Pressure and Vacuum Sealing Assemblies0 pages
T E C H N O LO G I E S
™
2 Tel: 1.716.684.4500 • USA Toll Free: 1.800.223.2389 • Email: info@conaxtechnologies.com • Website: www.conaxtechnologies.com
5001C 5001C TABLE OF CONTENTS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
ASSEMBLY
INSTRUCTIONS
4-5
6-13
14-17
18-25
26-27
28-31
32-35
36-37
38-39
40-45
46-47
48-49
Introduction to Conax Technologies®
Introduction to Conax Compression Seal Fittings
Selection Guide to Compression Seal Fittings
Single Element Sealing
Use these products when you need to seal a single element such as a temperature probe, tubewell, pipe, etc.
These products are capable of sealing on items made of materials such as metal, glass, ceramic or plastic.
Packing Gland (PG) Series
• For sealing on anything from fragile tubes and soft cables to solid probes or instruments
• Element diameters range from 0.040" (1.0mm) to 1.50" (47.5mm) pipe
Midlock ( MK ) Series
• Best used for sealing on metal elements and/or high vibration environments
• Stainless steel throughout – single ferrule is self-aligning
Electrode ( EG ) Series
• Fully isolating for electrical power or instrument isolation to 2000V
• High pressure, high temperature and current capabilities
Electrode Teflon ( EGT ) Series
• Fully isolating for bare electrical power leads or instrumentation isolation to 8000V
• Teflon insulation and sealant material for high performance and chemical resistance
Split ( PGS ) Series
• Seals cables and leads when larger probes or connectors are attached
• See Split (PGS/SPG/DSPG) Series in Multiple Element Sealing section – pages 64-67
High Density ( HD ) Feedthrough Series
• A compact and reliable wire sealing design - does not use epoxy or potting
• Seals from 12 to 60 wires per unit, 24 AWG, Teflon insulated
High Pressure ( HPPL / HPEG ) Series
• For sealing on power leads or instrument leads in high pressure environments
• For applications with pressures to 30,000 psi (2,070 bar)
Power Lead ( PL ) Series
• For high performance sealing from 1 to 18 larger gage wires sizes 8 to 20 AWG
• Rated 600Vac/850VDC @ 55A max – available with or without conductors
Transducer Gland Teflon ( TG24T ) Series
• Utilizes 24 AWG Teflon insulated copper or thermocouple leads rated at 100VDC
• Seals up to 24 Teflon insulated, 24 AWG instrument leads per fitting to 8000 psi (551 bar)
Transducer Gland Fiberglass ( TGF / TGM ) Series
• Utilizes fiberglass insulated thermocouple wire for applications > 450°F (232°C)
• Seals up to 24 high temperature insulated 20/24 AWG wires per fitting
Multiple Element Sealing – With Factory Installed Leadwires
Use these products when multiple wire feedthroughs are required to carry power or instrumentation signals into
pressure or vacuum environments. These compression seal fittings are manufactured with factory installed leadwires.
64-67