EG series0 pages
ASSEMBLY
ASSEMBLY
ASSEMBLY
ASSEMBLY
INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS
EG SERIES
ASSEMBLY
ASSEMBLY
ASSEMBLY
ASSEMBLY
INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS INSTRUCTIONS
5001C
EG SERIES
■
SINGLE ELECTRODE SEALING (to 2000 Volts)
FOLLOWER
SEALANT
BODY
CAP
Conax Technologies Model EG (Electrode) Glands are designed to
conduct rated amperage through vessel walls for applications such
as vacuum furnaces, autoclaves, transformers, power supplies and
other vessels requiring a sealed environment. EG glands also
electrically and/or thermally isolate single electrodes, tubes,
temperature sensors and liquid level probes in pressure/vacuum
applications. These bare electrical feedthroughs seal against gases
and liquids and resist element movement under pressure.
EG gland bodies with NPT threads or SAE threads are constructed
from 303SST standard. Weld-neck style glands are constructed from
316LSST. Caps and followers for all styles are constructed from
303SST. Many optional materials are also available. See page 9 for
details. Cap Style A offers a mounting thread only. Cap Style B
provides threading on both ends for attachment to conduit or
terminal heads. Alternative sealant materials are available. Please
consult a Conax Technologies sales engineer for custom needs.
• Temperature Range: -300˚ F to +1600˚ F (-185˚ C to +870˚ C)
• Pressure Range: Vacuum to 8,000 PSIG (551 bar) –
see Pressure Ratings in Specifications Chart.
• Voltage to 2000 VDC
• Amperage to 400 amp
• Supplied with or without conductor
Accessories
The replaceable sealant permits repeated use of the same fitting.
Electrodes can be easily assembled or replaced in the field.
To replace the sealant or element, simply loosen the cap, replace
the necessary items, relubricate and retorque the cap.
Glands are supplied factory lubricated. When reused, the glands
should be relubricated to maintain the published torque and
pressure ratings. If glands are cleaned prior to assembly, they
should be relubricated. On weld mount models, the heat from
the welding process will destroy the lubricant. These models must
Conductors are available in Copper, Nickel and 303SST. Use of
be relubricated prior to use. See page 103 for information on our
Nickel rather than Copper is recommended in oxidizing atmospheres. lubrication kit.
For further information on conductor selection, see page 11.
Replacement Packing Sets are available. These consist of a sealant
Custom conductors, such as nickel-plated copper, are available.
and two insulators. Replacement sealants, conductors and insulators
Please consult factory.
may also be ordered separately.
Pressure
Retaining
Side
Conduit
Connection
Side
Pressure
Retaining
Side
Sealant
Tapered End
Non-Pressure
Retaining
Sealant
Tapered End
Type A has mounting thread only.
Type B has cap end threaded. B Cap NPT
matches the standard mounting NPT.
To order a Replacement Packing Set, order
RPS – (Gland) – (Diameter) – (Sealant)
Example: RPS-EG-093-V
To order a Replacement Sealant only, order
RS – (Gland) – (Diameter) – (Sealant)
Example: RS-EG-093-V
For replacement insulators and conductors, see Accessories
on page 102.
™
TECHNOLOGIES
28
Tel: 1.716.684.4500 • USA Toll Free: 1.800.223.2389 • Email: info@conaxtechnologies.com • Website: www.conaxtechnologies.com