HPM6000 Hydraulic data logger0 pages
HPM6000
Hydraulic data logger
Up to
l 32 Intelligent Digital channels
l 16 analogue channels
l 4 million readings per test
The HPM6000 series is a highly-versatile portable hydraulic data logger, ideal for
diagnostic testing hydraulic systems, or for use on hydraulic test benches.
Three models allow configuration to meet the needs of the most demanding
application, enabling you to simultaneously connect between 16 and 26 different
hydraulic sensors. The base model is configured for use with the full range of
Intelligent Digital (ID) sensors, using the CAN protocol, while the other two models
also allow for connection of Sensor Recognition (SR), current and voltage sensors.
The ID sensors are connected in-line with one another, so saving on cabling and are
uniquely identified on the HPM6000. The 5.7 inch colour display can be configured to
display the readings in numerical, bar graph, dials and graphical display mode. There
are a variety of different data logging modes with the ability to data log up to 4 million
measured values per test at a variable interval from 1 ms to 24 hours, with a total
possible storage size in excess of 1 billion values.
All data can be exported to a PC running HPMComm 7.0 for further analysis or
storage off the unit. The HPM6000 series connectivity is the same across the
whole range - USB slave and USB host allow the unit to stream to a PC or laptop
and allow for the connection of additional storage up to 40 GB. The Ethernet port
enables remote monitoring over a network if required. The HPM6000 is loaded with
technology, yet is simple to configure and easy to use.
Milwaukee, WI 53235, USA
Tel: +1 (414) 769-6400
sales-us@webtec.com
St. Ives, Cambs. PE27 3LZ, UK
Tel: +44 (0) 1480 397 400
sales-uk@webtec.com
www.webtec.com
Features
ltComplete range of
sensors – pressure, flow,
temperature, tachometer
ltIntelligent digital sensors
(CAN protocol) for
easier wiring and auto
configuration
ltAnalogue sensor inputs
(HPM6116, HPM6216)
including HPM-SR range,
mA, volts
ltInternal storage for
over 36 million readings
– expandable to over 1
billion readings
ltLogging interval of 1 ms
to 24 hours
ltRe-chargeable internal
battery – mains charger
included
ltFull colour 5.7 inch display
ltIP64 and rubberised case
surround for protection in
harsh environments
ltComplete with HPComm
version 7 – PC software
ltConnectivity – USB Host,
USB slave, Ethernet
Certificate No.8242
Hydraulic measurement and control
HPM6000-BU-ENG-2680.pdf
(Issue 4)
11/13
"