Centrifugal pumps0 pages
Water recirculation vacuum pump DESCRIPTION Made from a centrifugal pump that puises water at a high velocity through suction aspirators, creating a pump rate of 10 litres/min from each pump connection. The vacuum achieved, 5 to 40mbar is dependent on the water temperature in the reservoir. Aspirated gasses from both inputs mix in the 10 litre reservoir. Although the interior of the pump is made from stainless steel and polypropylene it is a requirement to change the water in the pump to limit any attack of any chemicals or vapours absorbed in the water. For better protection of equip-ment it is recommended to connect a "Scrubber" to wash and neutralise any corrosive gasses. The pump in-cludes an exit valve that allows the water to be circulated externally. This can be used to empty and change the water in the reservoir to form an external re-circulation of water. FEATURES Reduced water consumption. 2 independent connections, aspiration pump vacuum rate 10 litres/min. Vacuum limit: 5 and 40 mbar (dependent on water temperature). Capacity: 10 litres. Low noise level (<65dBA). Valve connections for entrance and exit of vacuum and external water recirculation. CONTROLPANEL MODEL 2 vacuum connections. 2 analogue vacuum gauges. Illuminated mains switch. Part No. Height / Width / Depth Vacuum limit (exterior) cm mbar Pump rate litre/minute Power W Weight Kg 4001612 44 39 28 betwen 5 and 40 10 280 10 ACCESSORY Extraction system and neutralisation of vapours. Made up of a "Scrubber" unit that blocks the passage of condensed acid vapours and neutralises the gas vapour in NaOH, and a recirculating water pump that provides an adequate pump rate to aspirate vapours. It is supplied with 3 Kg. acid vapours neutralizer solution. "Scrubber" unit Part No. Height / Width / Depth Weight (exterior) cm Kg 4001611 32 31 16 2 Spare part: 3 Kg. acid vapours neutralizer solution. Part No. 4001610 Digestion block. "Scrubber" Re-circulating vacuum pump. Complete unit image for a Kjeldahl distillation block. SEI- Centrifugal pumps "MP" FEATURES Centrifugal pump for re-circulating and transferring of liquids. A selection of models with pump rates of 8 to 60 liͭtres/min. The motor power to the turbine is transmitted via a magnetic coupling. All parts in contact with liquids are chemically resistant materials. Manual priming. SERIES MP Dimensions per model in mm. MODEL Depth Height Width 0 MP-15R 129 82 74 60 MP-20R 210 108 116 92 MP-40RX 277 130 122 102 MP-100R 322 175 150 110 TECHNICAL DATA Part No. Pump rate (max) P (pressure) =0 (litres/min) Precision (min) Q (pump rate)=0 (bar) Tube connection (aspiration) Tube connection (output) Normal working temperature (°C) Function cycle Power consumption (W) Pump material: Body Turbine material: Pump spindle/axle material: Seals and junctions material: Voltage: MP-15R 5900610 8 0.21 14 mm 0 14 mm 0 0 - 80 continuous 10 MP-20R 5900611 17 0.37 18 mm 0 18 mm 0 0 - 80 continuous 20 MP-40Rx 5900612 47 0.40 26 mm 0 26 mm 0 0 - 80 continuous 65 MP-100R 5900613 60 0.50 26 mm 0 26 mm 0 0 - 80 continuous 250 Polypropylene with a mixture of fibre glass Polypropylene with a mixture of fibre glass ceramic aluminium oxide EPDM EPDM EPDM EPDM 220-240V 50-60Hz 52m Pumps
"