laschka_Double Sheeet Metal Control BDK (7 pages)0 pages
Sheet Metal Thickness / Double Sheet Detection BDK-1.3, BDK/FS-, …/FP-, …/PN-, …/OB-1.3
Series Universal Double Sheet Metal Monitor
Ref. no. 20.05-80, ...-81, ...-82, ...-93, 20.21-01
• Robust unit for reliable double sheet detection in destacking and loading facilities for sheet metal processing works (especially presses and press lines)
• Single surface contact measurement with DSP sheet
metal thickness sensor
Measuring range 0.2 mm … 6 mm (up to 5.5 mm for Fe)
• Single surface contact measurement with BDWF sheet
metal thickness sensor
Measuring range 0.2 mm … 6 mm (up to 5.5 mm for NF)
• Single surface contact measurement with DSPW combination sheet metal thickness sensor
Measuring range 0.2 … 4 mm (up to 3.5 mm for Fe)
Measuring range 0.2 … 3 mm (up to 2.5 mm for NF)
• Single surface non-contact measurement with DSD
sheet metal thickness sensor on reference basis
Measuring range 0.5 mm … 20 mm (up to 12 mm for Fe)
• Double surface non-contact measurement with sheet
metal thickness sensors BDWD/S and BDWD/E
Measuring range 0.2 … 3.5 mm (for ferrous
sheet metals)
Measuring range 0.2 … 20 mm (up to 6 mm for NF)
• Operation of 2 sensors on one device, several sensors
can be operated via T-coupler or sensor switch
• 256 program memories for different materials and
thicknesses with the associated sheet metal thickness
sensors in the standard operation mode
• Indication of sheet thickness and program parameter
Application
Double Sheet Monitors check the automatic destacking and
separation of ferrous (Fe) and non-ferrous (NF) workpieces
at sheet metal processing works (e.g. presses) with automatic feeding systems such as destackers, robots, feeders,
etc. They reliably detect the situations when two or more
sheets stick together. Thus the process can be stopped before damage to the machine or the tool occurs.
The BDK Double Sheet Monitor is suitable for operation with
various sheet metal thickness sensors for monitoring ferrous
and non-ferrous sheet metals. Depending on the sensor
and/or measuring method, a thickness up to max. 12 mm can
be detected.
Configuration
A lockable cover protects the evaluation device against unauthorised access. Sensor and evaluation device are characterised by a sturdy construction and a high protection class. The
ready-made connecting leads, with plugs and sockets on
both sensor and device ends, permit quick and easy mounting and commissioning of these devices.
Four operator keys and a four-line illuminated text display
permit the convenient entry of device and measuring parameters. There are 256 program memory locations, which permit
the storage of the measuring programs. They allow quick
changes of material or tool during operation, and the programs remain stored even when the device is switched off.
The RS232 interface, which is placed on the front panel of
the device, facilitates the down- and uploading of all program
parameters by means of a laptop and the PROPAR/BDK-1
software package.
• Standard version with electrically isolated parallel interface to system controller
• Field bus version with interface to different standard
field buses
• Serial interface for the down- and uploading of the program parameters
KLASCHKA
KB 10.12
BDK
1/7
© Klaschka Industrieelektronik GmbH • Am Zeller Pfad 1 • D-75242 Neuhausen • Fon +49 7234 79 0 • Fax 79 112 • e-mail: sales@klaschka.de • www.klaschka.de