Belt End sampler PRT0 pages

"PRTGRAVITY CHUTE/PIT-HOPPER/BELT END nn

INTERSYSTEMS INDUSTRIAL SAMPLERS

nn

U.S. PATENT 4,918,999
CANADIAN PATENT PENDING

nn

PRT APPLICATIONS

nn

INӔRETRACTEDOUTӔ INTOMATERIALFLOWSAMPLE SLOTSAMPLE TUBE(SHOWN EXTENDED)SAMPLE DISCHARGETO AN INTERSYSTEMSCOLLECTION SYSTEM
DRIVEHOUSINGDRIVE

nnPIPES/TUBES

INTERSYSTEMS PRT SAMPLE DISCHARGE
TO AN INTERSYSTEMS
COLLECTION SYSTEMINTERSYSTEMS PRTMATERIAL FLOWSAMPLEDISCHARGE TO AN INTERSYSTEMSCOLLECTION SYSTEM MATERIALFLOWSLOTTEDSAMPLE TUBE >

nnHOPPERS/CHUTES nn

SLOTTED SAMPLE TUBE OPERATION (END VIEW)

nnEND OF BELT CONVEYORS nn

1.At rest andretracted.
Tube starts toenter productstream at the 6 oclock
position then ҅2.As the tubemoves through
the productstream, it rotatesfrom the 6 to 3oclock positionwhile collectingthe sample.3.After thecollection, tuberetracts back
into the HD-PRT
sampler.4.Retracted, thetube thenrotates back tothe 6 oҒclockposition andreleases sampleinto the chute
ready to repeat.

INTERSYSTEMS PRT SAMPLE DISCHARGETO AN INTERSYSTEMSCOLLECTION SYSTEM MATERIAL FLOW >

nnPRT PRT nn

An industrial sampler for collecting samples from a wide range of materials.It samples fines, small or large particles andalso works with abrasive materials.Provides representative and repeatable samples, employs very simple and reliable
operation and uses minimum headroom.Mounting may be in chutes, hoppers, at belt-end or head chutes.When
activated, a slotted sample tube enters the product stream with the slot facing down.While fully extended, the sample
tube rotates 270 degrees, taking a representative sample through the product stream.Sample tube then retracts out of
the product stream, into the sampler housing and deposits the sample into the discharge.Sample tube can be drivenpneumatically or hydraulically.Standard construction:heavy gauge carbon steel housing and 304 stainless steel sample
tube.Other construction materials available as required by application.InterSystems control packages areavailable to suit any sampling control
application.The standard units allow
manual and automatic sampling modes
and contain all the essential components to
adjust and control the timing of sampling
operations.These units can handle a wide
variety of voltages and frequencies and can
be constructed for most environments.Electric:110V single phase control.Pneumatic:80 to 100 PSI.

nnCONTROLSPOWER REQUIREMENTS nn

24

"