Bolt anchor FAZ II0 pages
Efficient fixing for cracked concrete
VERSIONS
APPROVALS
▪ zinc-plated steel
▪ stainless steel
▪ highly corrosion-resistant steel
BUILDING MATERIALS
Approved for:
▪ Concrete C20/25 to C50/60,
cracked and non-cracked
Also suitable for:
▪ Concrete C12/15
▪ Natural stone with dense structure
ADVANTAGES
APPLICATIONS
FUNCTIONING
▪ The optimised expansion clip allows
for a high load-bearing capacity.
Thus fewer fixing points and smaller
anchor plates are required.
▪ The international approvals
guarantee maximum safety and the
best performance.
▪ The bolt geometry allows for optimal
load distribution and therefore
enables use close to edges and in
thin components.
▪ Fewer hammer blows and the
minimal torque slippage allow for a
noticeably simpler installation.
▪ The drive-in pin protects the thread
from damage and ensures a troublefree dismantling of the fixture.
▪
▪
▪
▪
▪
▪
▪
▪
▪
▪
High performance steel anchors
Bolt anchor FAZ II
▪ The FAZ II is suitable for prepositioned and push-through
installation; also suitable for stand-off
installation under certain conditions.
▪ Prior to installation, place the
hexagon nut in the optimal position
(the drive-in pin projects by approx.
3 mm out of the hexagon nut).
▪ When applying the torque, the cone
bolt is pulled into the expansion clip
and expands it against the drill hole
wall.
▪ The head embossing offers a simple
control of the anchoring.
▪ In the case of series installation, we
recommend using the FABS anchor
bolt setting tool.
http://www.fischerwerke.de/en/ - 13/07/2012
Steel constructions
Guard rails
Consoles
Ladders
Cable conduits
Machines
Staircases
Gates
Façades
Wood constructions
1