Precision Strip and Foil0 pages
A Powerful Force
in Precision Strip & Foil
Rolling Slitting, Heat Treating, Testing & Evaluation of Magnetic & Non-Magnetic Alloys
■ Nickel Iron Alloys:
Moly Permalloy, 4750-49 Ni, Invar® 36
■ Controlled Expansion Alloys:
NiSpan-C®, Kovar®-029, Sealmet® 2917, Al 42
■ Magnetic and Cobalt Alloys:
Arnokrome™, Vanadium Cobalt Alloys, Arnon™ and 3%
Silicon Steel (Thin; Oriented and Non-Oriented)
■ Copper-Base Alloys:
Beryllium Copper Alloy 25, OFHC Copper,
Phosphor Bronze
■ Titanium Alloys:
Titanium (grades 1 through 4), 3A1-2.5V, 15-3-3-3,
Bio-Compatible Alloys
■ Nickel Base and High-Temperature Alloys:
Nickel 201, 233 and 290; Inconel® 600, 601, 617, 625, 718
and X750; Hastelloy® B-2, C-276, C-22
■ Spring Alloys:
Arnavar™, Havar®, Elgiloy®
■ Ferrous Based:
Carbon and Low Alloy Steels, Stainless Steels, Pure Iron
Arnold’s Rolled Products works extensively with these and a number of other magnetic and non-magnetic alloys to exceed your
demanding physical and mechanical requirements.
Arnold’s own ARNOKROME™ is one example of our capabilities. We can customize the properties of ARNOKROME™ or other alloys to
satisfy a variety of mechanical, surface, magnetic, or other requirements.
Capabilities:
■ Precision thin gauge alloy foil available in: sheet, strip and continuous coils. Available widths from 16.5" to a minimum of 0.035"
(0.9 mm). Minimum thickness of 0.0005" (0.0125 mm) for 4 to 16.5" in width and 0.000085" (2.16 micron) for 4" widths and less.
■ Arnold offers wire, rod and bar stock for selected magnetic alloys such as the ductile ARNOKROME™ III alloy developed by Arnold
based on the iron-chrome-cobalt alloy system. ARNOKROME™ III is a lower cost, more readily available alternative to CuNiFe,
Vicalloy and Cobalt Steels. We also offer Vanadium Permendur soft magnetic bar stock (Fe-V-Co) which, with the highest magnetic
saturation available, is particularly useful in pole pieces and guide tubes.
■ Piece Parts can be provided. Examples include hysteresis rings,
precision laminations, small washer and vane shaped magnets,
magnetic clutch and brake discs, level sensor components
and gauge vanes.
When you’re searching for thin gauge
alloys, Arnold PROVIDES SOLUTIONS.