RogaDAQ 40 pages
INTELLIGENT TESTING EQUIPMENT
RogaDAQ 4
Four Channel USB
Data Acquisition System
TECHNICAL DATA:
Analog Inputs
4 BNC Input Channels,
differential & single ended, optically decoupled
Resolution
24bits for each channel, simultaneous sampling
Frequency range
DC - 80 kHz
Sample rate per channel
8/16/24/32/48/92/192 kHz
Input voltage range
±10 V / ±1 V selectable
Input coupling
DC/AC/IEPE selectable
Sensor supply
4 mA @ 24 V
Impedance of input
1 MΩ, 20 pF
Over voltage protection
±40 V
Anti alias filterer
800 dB / octave
Dynamic range
free of distortion > 123 dB
Precision of amplitude
better 0.1 %
RogaDAQ4 Front End is a high precision portable data
acquisition system. Four simultaneously sampled 24bits
resolution channels measure precisely any signals with frequencies up to 80kHz. RogaDAQ4 combined with PC or
notebook is a perfect measurement solution. It offers high
levels of precision and it is very easy to use.
Possible Applications
• PC based portable data acquisition
• Frequency analysis in the range 0 - 80kHz
• Structural analysis
• Modal analysis
• Machine maintenance
• Building acoustics and building oscillation analysis
• Process monitoring
• Final check
Properties
• Four high precision inputs with 24bits A/D converter
• 8 - 192 kS/s selectable sample rate
• Integrated anti alias filter ensures perfect
signal integrity
• AC, DC coupling or IEPE for direct power supply
• Tachometer input
• 5 Volt power supply
• Rugged aluminium case
Technical Details
RogaDAQ4 high precision inputs are designed for
measuring dynamic signals. They are sampled simultaneously. Signals are digitized at a maximum of
192kS/s with 24bits resolution.
Tachometer input
Resolution
Input voltage range
Basic frequency
Two inputs
32bits
±30 V
10 MHz
Miscellaneous
Interface
Connectors
USB 2.0
BNC receptacles, counter Lemo Type
EPG.0B.303.HLN
Power supply
inklusive Netzteil für Spannungsversorgung 220 V AC / 5.2 V DC
Rugged aluminium case closed on all sides
Dimensions
180 x 118 x 64 mm
Weight
400 g
Operating temperature range
0 - 55 °C
Preamplification is realized with noise reduced
instrument amplifiers with extremely low distortion.
For IEPE compatible sensors a constant current
source can be activated by software.
User Software
The RogaDAQ4 front end can be operated directly out
of DasyLab version 13.0. This allows to perform complex
monitoring tasks like final checks in production lines or
monitoring of a frequency range with signaling if predefined intervals are left. And all of this without writing
a single line of code. Beside this drivers are available
for customer specific programming for .NET, ANSI C,
Visual C++ 6.0, Delphi, DasyLab, LabView, and MatLab.
ROGA-Instruments, Steinkopfweg 7, D-55425 Waldalgesheim
Phone: +49 (0) 6721-98 44 54, E-Mail: info@roga-instruments.com