3-STRAND 90° ROUND BELT TRANSFER0 pages

ModelRBT3 provides an excellent method of transferring up to 100# product at 90а intervals. And, no drive is necessary when mounted into Roach line shaft driven conveyor. Each unit shown mounted in optional line shaft driven conveyor. Model at right includes optional frame cut-outs and blue paint. BFWT. (lbs.)BFWT. (lbs.) SPECIFICATIONS >
15"14933"18621"16539"204 TRANSFER ARM: 10 ga. formed channel. AIR CONTROLS: Air cylinder with singlesolenoid valve. (60-80 PSI required) TRANSFER BELT: 3/8" dia. roundpolyurethane belt. FLOOR SUPPORTS: NOTE: Specify twist (clockwise or counter clockwise) for drive bands on line shaft conveyor (model LS or LSA) that transfer mounts in. Consult factory. Transfer is designedto attach to 796LS/738LS conveyors w/
mounting hardware integral feature of
transfer. OPTIONAL EQUIPMENT STRANDS: 2 and 4 LENGTHS: Transfer designed to mount in796LS line shaft conveyors 15"-39" BF. BELT CENTER: 18" and 24" with 4"centerline minimum. DIRECTIONOF FLOW: Reversible. BELT CENTERS: 12" MOTORDRIVE: BELT SPEED: For some speedchanges an optional drive may be
required. Consult factory. 1/2 HP,230/460/3, 60 cycle, ODP right
angle gear motor. Other HP and
characteristics available such as
TEFC, explosion proof, dirty duty,
brake motor, 115/230/1, 575/3. ONEDIRECTIONFLOW: Transfers product in one direction. TAKE-UP: Adjustable sheaves provides take-up of transfer belt. BEARINGS: Heavy duty, lubricated, ballbearing units with cast iron housings. BELT SPEED: Driven at 150% of speed aspowered section transfer is mounted in. LIFT: 3/4" positive lift. MOTOR DRIVE: Optional. CAPACITY: 100 lbs. >
3 week shipment >

61