R I X 2 V 3 B0 pages
RIX 2V3B
HIGH PRESSURE
OXYGEN COMPRESSOR
for cylinder filling
RIX INDUSTRIES’
2V3B FEATURES:
■
■
■
■
■
■
Oil-Free Design
Proven Safety
Features
Compact,
Lightweight
Low RPM for Long
Service Life
Continuous,
Around-The-Clock
Operation
Inlet Pressure
Autocycling (Auto
Start/Stop)
Discharge Pressure to 2500 psig (172 bar)
Flow Rate; 3.8 to 10 scfm
(225 to 600 scfh; 6 to 16 Nm3/hr)
RIX Oxygen Compressors have
been developed specifically for the
exacting requirements of safe, reliable
oxygen compression service. The 2V3B
Series incorporates design features
developed over several decades for a
variety of industrial and military
oxygen compressor applications.
These compressors are well suited for
the compression of oxygen to 2500
psig, and other clean, dry gases to
3000 psig. The 2V3B high pressure
oxygen compressor will fill up to sixty
(60) 240 cu. ft. 2500 psi oxygen
cylinders in a 24 hour period.
2V3B three-stage compressors
employ three oil-free single acting
cylinders on a “V” type crosshead
design crankcase. Heat exchangers,
crankcase and compression cylinders
are air cooled. The free-floating third
stage piston allows the piston and
rings to be changed with ease.
Replacement of the floating piston
assembly typically requires only about
30 minutes. The ring life of the third
stage at 2500 psig has proven to be
more than 3000 hours. Service life of
the first and second stages is
considerably longer.
The RIX 2V3B high
pressure oxygen
compressor will fill up to
sixty (60) 240 cu. ft. 2500
psi oxygen cylinders in a
24 hour period.
RIX INDUSTRIES
6460 Hollis Street
Oakland, CA 94608 USA
Phone (510) 658-5275
Fax (510) 428-9102