K400 AND S-PRO0 pages
NEWS 2014
K400
COMPLYING
WITH
EN
AVAILABLE FROM SEPTEMBER
• K400 is the new RIB operator for sliding gates
weighing up to 400Kg.
• It will be available with magnetic or electromechanical limit switches, but also in a special
version with integrated the RIB Wi-Fi system.
news that brings in a single electronic card
all the normal functions of management of a
gate automation but above all also the wireless
management of photocells, safety edges, flashing
etc., obviously without having to connect any
wire from the control panel to these accessories !
• In the control panel the memory of the remote
control codes can be removed to facilitate the
maintenance.
• The control panel can also be programmed
remotely via a programmer (ACG4672).
• This Wi-Fi system in particular, is a world-wide
FOR SLIDING GATES WEIGHING UP TO 500 kg
AA40905
K400
with magnetic limit switches and K 24V-CRX electronic control panel
AA40900
K400
with electro-mech. limit switches and K 24V-CRX electronic control panel
AA40925
K400 Wi-Fi with magnetic limit switches and K 24V-CRX Wi-Fi electronic control panel
AA40920
K400 Wi-Fi with electro-mech. limit switches and K 24V-CRX Wi-Fi elec. control panel
ACG4667
BATTERY CHARGER for K400
ACG4672
K 24V PROGRAMMER and RX S-PRO
S-PRO
THE REMOTE CONTROL THAT CANNOT BE COPIED ! AVAILABLE FROM SEPTEMBER
• 200 bits rolling code Remote Control.
handle up to 800 remote controls.
the radio receiver.
• RIB is the owner of the algorithm and it cannot
be duplicated.
• The codes in the remote controls can be inducted
by using the Programmer (ACG4662).
• Through the Programmer (ACG4662) the radio
receiver can be installer’s loyal.
• The procedures for creating a code and for
cloning are identical to the standard remote
controls.
• The S-PRO allows you to store the codes of each
installation on a SD-CARD and in your PC.
• The possibility of sending a replacement remote
control that can automatically disable the lost one
without the need to intervene on the installation
by the installer or end user.
• They use dedicated radio receivers that can
• Through the Programmer (ACG4662) one can
remotely make the maintenance of the codes in
ACG6210 S-PRO 2CH
2-channel Transmitter
433,92 MHz
BATCH OF 24 PIECES
BATCH OF 24 PIECES
ACG6220 S-PRO CLONE 2CH
2-channel Transmitter
433,92 MHz
6
ACG6214 S-PRO 4CH
4-channel Transmitter
433,92 MHz
ACG6224 S-PRO CLONE 4CH
4-channel Transmitter
433,92 MHz
BATCH OF 24 PIECES
BATCH OF 24 PIECES
"