MOLI 2110 HP on Mack Chassis0 pages

MOLI 2110 HP on Mack Chassis
The mobile pipeline concrete pump for high-pressure delivery
Advantages
of the MOLI
■ maximum
profitability,
as it can be
used at several
construction
sites during the
day
■ extremely powerful pump power
unit
■ transports everything required for
delivery
■ simple oper­ation and easy handling
■ 880 l water tank and flushing water
pump for cleaning on construction
site
Stationary concrete pumps cannot be
used cost-efficiently for short pours. For
jobs like these, the MOLI is a simply unbeatable solution, a real “toughie“ with
up to 106 m3 delivery output and 220 bar
concrete pressure can cope with any job
that comes its way. The pump is quickly
set up and is ready for operation in next
to no time at all. And when the MOLI has
finished the job, the site is available for
other work.
The combination of an extensive range
of equipment and accessories, plus max­
imum mobility allows the MOLI to be
used on a variety of jobs thus making full
use of its many capacities.
MOLI is optimally equipped to clean
long delivery lines: a powerful compressor (option) and high-pressure flushing
water pump (option)plus a 880 l water
tank (standard).
Numerous other variations in equipment
make the MOLI a match for any assignments required on site.
■ requires space only during placing
concrete; afterwards, the construction
site is available for other work
■ no time-consuming set-up,
no crane required
Standard delivery scope
EPS - Ergonic® Pump System
constantly monitors and regulates the
operation of the concrete pump and the
truck engine. Pump data, such as deliv­
ery pressure, delivery rate of the hydraul­
ic pump, hydraulic pressure and many
other signals, is actively and perfectly
co-ordinated. This means maximum productivity and performance with minimum
intervention from the operator.
The pump operator can display important
information about the machine centrally
on the EGD (Ergonic® Graphic Display)
in the control cabinet. The individual
parameters for the machine can be set
here.
■ S-transfer tube S2015 P9 HM
■ Hopper RS905HPF
■ DN150 (6”) outlet
■ Hard-chromed material cylinders
■ Multi piece piston cups
■ 2 x 36” x 24” x 24” toolbox
■ CPC incl. engine s/s, output cable
remote control
■ Rear outrigger extend down, fully
hydraulic
■ Ergonic® Pump System (EPS)
■ Plastic water tank (880 l)
■ Voltage: 24 Volt
■ Vibrator, electrically
■ Rubber collar
■ Flushing water pump 160 l/min
(GRUNDFOSS)
■ Putzmeister standard two colour paint
BP 4112 GB