rcxxxx_usb_stick0 pages

Radiocrafts
Embedded Wireless Solutions

RCxxxx-USB

USB-stick with RF Module and Embedded Antenna
Product Description
The RC11xx / RC2400HP / RC2500HP family of USB sticks contains a RF transceiver
module from the wide selection of Radiocrafts modules, together with USB level shifter, USB
A connector and antenna. All fits inside a transparent plastic enclosure for visibility of
embedded LEDs.

Applications
• Home- and building automation
• Smart Metering / AMR / AMI
• Electricity, gas, water and heat meters,
installation and monitoring/control
• Energy Service Portal (ESP) / Load Control
• Wireless sensor networks

Features
• Embedded protocols for KNX RF, Wireless M-Bus, ZigBee (supporting profiles like Smart
Energy), TinyMesh and RC232
• 100mW / 20 dBm output power for 2.4 GHz modules
• Integrated antenna option / U.FL connector option
• Conforms with EN 300 220 and EN 300 328 (Europe), FCC CFR 47 part 15 (US),
ARIB STD-T66 (Japan) and G.S.R. 542(E)/45(E) (both for India)

Embedded protocols and supported frequencies
The USB-stick contains a certified module with a selection of RF protocols running on a
hardware platform at either: 433 MHz, 865 MHz, 868 MHz, 915 MHz or 2.4 GHz.
For full overview over each module, visit www.radiocrafts.com for the available literature for
the embedded module itself:
- User Manual (KNX, MBUS, RC232, ZNM (ZigBee))
- Data sheet (RC11xx-MBUS, -KNX, -RC232, TinyMesh or ZNM) and
RC2500HP-TM (TinyMesh) or –RC232
The documentation is available at the Radiocrafts webpage after selecting the protocol and
then product article number.