Presona LP 40 OH0 pages
Presona AB, PO Box 63, SE-273 22 Tomelilla. Tel: +46 417-199 00, Fax: +46 417-199 32
E-mail: sales@presona.se | www.presona.com
Presona LP 40 OH
As part of our continuing product improvement, specifications are subject to change without notice.
LP 40 OH
A hydraulic horizontal baler developed for efficient waste paper handling for the packaging and printing industry. The baler has a very compact design and is extremely spacesaving thanks to its tying device with curved strapping needles. The hydraulic unit with oil tank is mounted directly onto the baler. Connection to electrical mains supply is easy - no need for expensive
electrical installations - the motor control center of the LP 40 OH is complete with fuses and switches. The main cable is simply connected to your mains supply.
Function
The material can be fed to the LP 40 OH either by means of a pneumatic conveying system or by a feeding
conveyor. A photocell system in the feed hopper controls the material flow and the press operation.
Strapping
The LP 40 OH is equipped with a fully autmatic horizontal
strapping unit with four strapping wires. Needles and twisting unit are working hydraulically and are driven from the main hydraulic unit. The wire brake always makes sure that the wire knots are placed on the short sides of the bale, reducing the tension on the wires and preventing the knots from unwinding.
Another important advantage with the wire pulling system is the the wire ends can be kept extremely short (25 - 30 mm), which of course have a favourable
effect on wire costs.The bale length is adjustable from the main controi panel - bale length can be set from 50 mm and up. Design
The LP 40 OH is made entirely of steel. The main parts of the baler are the friction channel with an adjustable
friction flap, bale length monitor, main press (without knives), main press cylinder, feed hopper with photocell system, strapping unit, hydraulic unit with tank, pumps and valves and the motor control center with control panel. Serviceability
All safety panels and gates have big inspection doors. All Presona balers are manufactured according to the requirements of the CE regulations. Safety
Safety first - all moving parts are covered by safety panels and gates, effectively preventing accidental contact. Panels and gates are equipped with safety switches, immediately turning the machine off and stopping all movements when a panel or gate is opened.
Emergency stop buttons are strategically placed throughout the baler.